i have a usbJtag original, and i would like to use it so i dont have to wait 100 years to flash over lpt.
i have all the information (i think) that i need, i just need a little help building the usbjtag.def file for this device.
if anyone could point me maybe to a link that shows me how to build the .def file, or can look over this and off the top of their head guide me where i need to go, would be greatly appricated. thanks much!
Code: Select all
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00000000000000000000000000000001 (00000001)
*** Found a Atheros AR531X/231X CPU chip ***
- EJTAG IMPCODE ....... : 01000000010000000100000000000000 (40404000)
- EJTAG Version ....... : 2.6
- EJTAG DMA Support ... : No
- EJTAG Implementation flags: R4k ASID_8 NoDMA MIPS32
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Halting Processor ... <Processor Entered Debug Mode!> ... Done
Clearing Watchdog ... Done
Enabling Atheros Flash Read/Write ... Done
.RE-Probing Atheros processor....
Probing Flash at (Flash Window: 0x1fc00000) ...
Done
Flash Vendor ID: 00000000000000000000000010001001 (00000089)
Flash Device ID: 00000000000000000000000000010110 (00000016)
*** Found a Intel 28F320J3 2Mx16 (4MB) Flash Chip ***
- Flash Chip Window Start .... : 1fc00000
- Flash Chip Window Length ... : 00400000
- Selected Area Start ........ : 00000000
- Selected Area Length ....... : 00000000
*** REQUESTED OPERATION IS COMPLETE ***