Working project

News to announce.
Post Reply
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Working project

Post by usbbdm »

I am working on adding SD card read/write support for USB JTAG NT. This is for future on board NAND support.
Last edited by usbbdm on Sun Feb 02, 2020 9:59 pm, edited 1 time in total.
Pichardo
Junior Member
Posts: 79
Joined: Tue Jun 17, 2008 11:19 pm

Re: Working project

Post by Pichardo »

Thats gonna be a nice option.

Thanks for your hard work.
phoenix81
Junior Member
Posts: 3
Joined: Thu Oct 03, 2019 1:14 am

Re: Working project

Post by phoenix81 »

nice work
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: Working project

Post by usbbdm »

After study the protocol, I think there is a hardware limitation to access SD card with USB JTAG NT. There is a need to use slow clock to get SD card into SPI mode while the slowest clock for NT is 3MHz.
However this does not prevent USB JTAG NT to support NAND flash via SPI if target supports it. Like our support XBOX360.
So I might need to skip the support SD card and directly go to NAND via SPI when I have enough info to get started.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: Working project

Post by usbbdm »

Another fun project will be allow USBJTAG NT to go into programming mode.
That is use one USB JTAG NT software with several USB JTAG NT with its own control to program the target.
I will keep you posted about the experiment.
phoenix81
Junior Member
Posts: 3
Joined: Thu Oct 03, 2019 1:14 am

Re: Working project

Post by phoenix81 »

cheers for info
phoenix81
Junior Member
Posts: 3
Joined: Thu Oct 03, 2019 1:14 am

Re: Working project

Post by phoenix81 »

spot on this ideal waiting projecting
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: Working project

Post by usbbdm »

Here is a quick look of the Four JTAG screen.
majacaem
Junior Member
Posts: 13
Joined: Tue Sep 05, 2017 9:15 am

Re: Working project

Post by majacaem »

Very nice !!! it will be amazing
miguel7412
Junior Member
Posts: 2
Joined: Fri Jan 23, 2009 10:37 am

Re: Working project

Post by miguel7412 »

good work
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests