Thanks for getting in touch today.
Some more random information. I will keep posting anything I find hoping that it can help you, and I will be picking out the perfect ecu for you.
http://www.mdsacademy.co.kr/new/bbs/rea ... =&keyword=
Infineon Tricore Bootmode
-
- Junior Member
- Posts: 9
- Joined: Tue Mar 18, 2014 12:40 pm
-
- Junior Member
- Posts: 26
- Joined: Thu Nov 29, 2007 10:08 pm
http://www.embeddedrelated.com/usenet/e ... 6772-1.php
http://www.infineon.com/cms/en/product/ ... 6b50fe07c9
http://www.infineon.com/cms/en/product/ ... edc494011e
from infineon memtool
"Infineon Memtool 4 Overview
The Infineon On-Chip Memory Programming Tool 4 (Memtool 4) is intended to handle the on-chip FLASH and OTP memory devices on Microcontrollers of the XC800, XC16x and TriCore families. According to the capabilities of the respective on-chip memory device the program allows to erase, program, verify and protect the module. To program a memory device one can open an Intel-Hex-File and completely or partly write its contents into the memory device. Infineon Memtool 4 can be used on PC's running Microsoft Windows2000, WindowsXP Pro, Windows Vista or Windows 7. The target is connected to the host PC using DAS Wigler or a standard RS232 port.
?
http://www.infineon.com/cms/en/product/ ... 6b50fe07c9
http://www.infineon.com/cms/en/product/ ... edc494011e
from infineon memtool
"Infineon Memtool 4 Overview
The Infineon On-Chip Memory Programming Tool 4 (Memtool 4) is intended to handle the on-chip FLASH and OTP memory devices on Microcontrollers of the XC800, XC16x and TriCore families. According to the capabilities of the respective on-chip memory device the program allows to erase, program, verify and protect the module. To program a memory device one can open an Intel-Hex-File and completely or partly write its contents into the memory device. Infineon Memtool 4 can be used on PC's running Microsoft Windows2000, WindowsXP Pro, Windows Vista or Windows 7. The target is connected to the host PC using DAS Wigler or a standard RS232 port.
?
-
- Junior Member
- Posts: 26
- Joined: Thu Nov 29, 2007 10:08 pm
http://www.infineonforums.com/threads/7 ... -Boot-Mode
everything here in this PDF looks very nice with source code links?
http://www.infineon.com/dgdl/ap3213610_ ... 4ca2&ack=t
everything here in this PDF looks very nice with source code links?
http://www.infineon.com/dgdl/ap3213610_ ... 4ca2&ack=t
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
Re: Infineon Tricore Bootmode
I now have a Tricore ECU in hand. I think using serial port to program the ECU is possible with the existing document.
I am also interested in programming it via JTAG. However the OCDS document for TC17XX cannot be found anywhere. I have requested to get the document from Infineon but get nothing back other than being asked a few questions.
If anyone have the OCDS information, please contact me.
I am also interested in programming it via JTAG. However the OCDS document for TC17XX cannot be found anywhere. I have requested to get the document from Infineon but get nothing back other than being asked a few questions.
If anyone have the OCDS information, please contact me.
-
- Junior Member
- Posts: 4
- Joined: Fri Nov 19, 2021 1:02 pm
Re: Infineon Tricore Bootmode
Did anyone ever try this or was anymore development done? I have a BMW ME9.2 by Bosch I am trying to read and so far I have had no success with Ktag, MPPS, etc. Was just wondering if anyone had any luck with usb Jtag?
Thanks
Thanks
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
Re: Infineon Tricore Bootmode
I thought no one is interested and stopped the development. I am now working on another CPU for ECU and can come back of development after that.
Who is online
Users browsing this forum: No registered users and 8 guests