2500 box poor signal
-
- Junior Member
- Posts: 17
- Joined: Thu May 16, 2013 10:40 am
2500 box poor signal
Hey guys i have another issue i want to see if im doing something wrong. I have 2 2500 boxes recently that after programming them they go to poor signal. I dont think its a bad firmware or anything since both the boxes are from different areas and both i used a different firmware to program and both still got poor signal. Heres the commands ive always been doing on 2500 boxes and never had a problem until today.
1)detect
2)ldram nvram
3)setram nvram
4)program 90000000 400000
5)program plat
Again ive done this same commands on alot of 2500 boxes and for some reason it only happens now on these 2 poor signal. Any ideas?
1)detect
2)ldram nvram
3)setram nvram
4)program 90000000 400000
5)program plat
Again ive done this same commands on alot of 2500 boxes and for some reason it only happens now on these 2 poor signal. Any ideas?
-
- Junior Member
- Posts: 17
- Joined: Thu May 16, 2013 10:40 am
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
-
- Junior Member
- Posts: 17
- Joined: Thu May 16, 2013 10:40 am
-
- Junior Member
- Posts: 439
- Joined: Tue Mar 23, 2010 6:12 am
-
- Junior Member
- Posts: 17
- Joined: Thu May 16, 2013 10:40 am
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 638
- Joined: Fri Aug 20, 2010 1:47 pm
- Location: Some ware just like you.
- Contact:
-
- Junior Member
- Posts: 17
- Joined: Thu May 16, 2013 10:40 am
I actually unbricked it with some luck but it would be great if you can still see if you can get rid of the poor signal issue. I have team viewer set up and ready to partners id in. Im in chicago so it is 2 o clock now and i will be here until 8 central time. How can we do this im not sure where you are located.
-
- Junior Member
- Posts: 53
- Joined: Thu Mar 18, 2010 5:47 pm
-
- Junior Member
- Posts: 638
- Joined: Fri Aug 20, 2010 1:47 pm
- Location: Some ware just like you.
- Contact:
Write back the original back to the box and see if you get poor signal.p128sniper wrote:I actually unbricked it with some luck but it would be great if you can still see if you can get rid of the poor signal issue. I have team viewer set up and ready to partners id in. Im in chicago so it is 2 o clock now and i will be here until 8 central time. How can we do this im not sure where you are located.
Good better best
Who is online
Users browsing this forum: No registered users and 2 guests