I've tried the scripted and manual methods with the same results.
Am I doing something wrong?
Code: Select all
Mode LastWriteTime Length Name
---- ------------- ------ ----
-a---- 28/07/2021 22:31 851 mr33.usp
-a---- 28/07/2021 22:31 125435904 ubimr33.bin
-a---- 28/07/2021 22:31 2162688 ubootmr332012.bin
Code: Select all
U-Boot 2017.07-RELEASE-g78ed34f31579 (Sep 29 2017 - 07:43:44 -0700)
DRAM: 242 MiB
machid : 0x8010001
Product: meraki_Stinkbug
NAND: ONFI device found
ID = 1d80f101
Vendor = 1
Device = f1
128 MiB
Using default environment
In: serial
Out: serial
Err: serial
machid: 8010001
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 115 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 456, bad PEBs: 464, corrupted PEBs: 0
ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 35/16, WL threshold: 4096, image sequence number: 2086049366
ubi0: available PEBs: 11, total reserved PEBs: 445, PEBs reserved for bad PEB handling: 0
Read 0 bytes from volume part.safe to 84000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume part.old to 84000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
resetting ...
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00096
S - IMAGE_VARIANT_STRING=DAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000025
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1339 - bootable_media_detect_entry, Start
B - 2609 - bootable_media_detect_success, Start
B - 2623 - elf_loader_entry, Start
B - 4030 - auth_hash_seg_entry, Start
B - 6179 - auth_hash_seg_exit, Start
B - 73719 - elf_segs_hash_verify_entry, Start
B - 194080 - PBL, End
B - 194104 - SBL1, Start
B - 282736 - pm_device_init, Start
D - 6 - pm_device_init, Delta
B - 284261 - boot_flash_init, Start
D - 87402 - boot_flash_init, Delta
B - 375711 - boot_config_data_table_init, Start
D - 13987 - boot_config_data_table_init, Delta - (419 Bytes)
B - 392391 - clock_init, Start
D - 7584 - clock_init, Delta
B - 403379 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:1
B - 406865 - sbl1_ddr_set_params, Start
B - 411851 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 416341 - Pre_DDR_clock_init, Start
D - 5 - Pre_DDR_clock_init, Delta
D - 13142 - sbl1_ddr_set_params, Delta
B - 429621 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 500252 - sbl1_wait_for_ddr_training, Start
D - 27 - sbl1_wait_for_ddr_training, Delta
B - 515781 - Image Load, Start
D - 140732 - QSEE Image Loaded, Delta - (262104 Bytes)
B - 657011 - Image Load, Start
D - 2119 - SEC Image Loaded, Delta - (2048 Bytes)
B - 667173 - Image Load, Start
D - 123225 - APPSBL Image Loaded, Delta - (285640 Bytes)
B - 790821 - QSEE Execution, Start
D - 56 - QSEE Execution, Delta
B - 796993 - SBL1, End
D - 604969 - SBL1, Delta
S - Flash Throughput, 1993 KB/s (550211 Bytes, 275935 us)
S - DDR Frequency, 672 MHz