solder jtag correctly but still modem does not work.

USB BDM software. Bug report.
Post Reply
keyence
Junior Member
Posts: 5
Joined: Sat Aug 24, 2019 3:23 pm

solder jtag correctly but still modem does not work.

Post by keyence »

i programed a sb6140 modem correctly but is not working? i solder the jtag is it possible that the solder did not solder correctly and still forceware loads correctly into the modem and see it but not work when plugging the coaxial cable. (bad solder into the jtag) but why i see forceware in the modem?
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: solder jtag correctly but still modem does not work.

Post by usbbdm »

How do you determine you have soldered properly?
keyence
Junior Member
Posts: 5
Joined: Sat Aug 24, 2019 3:23 pm

Re: solder jtag correctly but still modem does not work.

Post by keyence »

i dont know maybe loose wires but i check them and they are ok so i have no idea what it is because the boxes dont work at all. but when i type 198.168.100.1 i see forceware there. so i have no idea whats going on..
keyence
Junior Member
Posts: 5
Joined: Sat Aug 24, 2019 3:23 pm

Re: solder jtag correctly but still modem does not work.

Post by keyence »

hi i been watching your youtube videos and the blue bar when you are programing fills all the way up. mine only goes to like 3/4 and stops is that normal? this is my second usbjtag i done programing before but this time im having lots of problems. thanks.
keyence
Junior Member
Posts: 5
Joined: Sat Aug 24, 2019 3:23 pm

Re: solder jtag correctly but still modem does not work.

Post by keyence »

and about the new u-link nt product i definetely will buy one :) is there a guide (pdf) file with the extra items that we have to get? or is there a complete package that you sell. thank you..
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: solder jtag correctly but still modem does not work.

Post by usbbdm »

If the program stops. It is not normal. Check your connections. The PDF manual can be found in the software folder.
keyence
Junior Member
Posts: 5
Joined: Sat Aug 24, 2019 3:23 pm

Re: solder jtag correctly but still modem does not work.

Post by keyence »

i mean it completes but without the bar filling all the way.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: solder jtag correctly but still modem does not work.

Post by usbbdm »

If you find me online I can try to remote desktop see your desktop.
Go to any page of www.usbjtag.com and on lower right find the chat window.
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests