Can't write to DSR-920
-
- Junior Member
- Posts: 10
- Joined: Tue Jul 10, 2012 10:57 am
Can't write to DSR-920
Help! I am able to read the NVRAM from my DSR-920 but I am unable to write to it. I get a detect flash first error. When I try to detect the flash, I get an unable to detect flash error followed by this code: 4343,6f6f. Anyone have any ideas?
And why the heck does the software say that I am testing a DSR401?
And why the heck does the software say that I am testing a DSR401?
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
If you cant write it then the READ you got from it IS NO GOOD. You should zDetect First then Read NVRAM. Not READ NVRAM then Detect.jspan wrote:Help! I am able to read the NVRAM from my DSR-920 but I am unable to write to it. I get a detect flash first error. When I try to detect the flash, I get an unable to detect flash error followed by this code: 4343,6f6f. Anyone have any ideas?
And why the heck does the software say that I am testing a DSR401?
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 10
- Joined: Tue Jul 10, 2012 10:57 am
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Thats why I told you that the NVRAM READ is NO GOOD. You have to First detect then READ. IF you can't Detect, Then you Must Fix what ever the Problem is. Whether its a Copnnection Problem or a DLL problem. It needs to Be fixed before you can be able to read and program properly.jspan wrote:That's my problem. The software won't detect the flash memory. When I type "flshdct" the software returns with "unknown flash type!"
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 10
- Joined: Tue Jul 10, 2012 10:57 am
How do you do that?usbbdm wrote:If you want setup teamviewer and I can take a look. The information you are given is not enough.
I just uninstalled the software and then reinstalled it and tried again. Same error when I try to write, "detect flash type first!"
Even when I type in "detect" the software tells me it's a bad command.
I will be gone for a week so if you don't hear back from me, that is why.
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
Google is your best friend for teamviewer.jspan wrote:How do you do that?
I just uninstalled the software and then reinstalled it and tried again. Same error when I try to write, "detect flash type first!"
Even when I type in "detect" the software tells me it's a bad command.
I will be gone for a week so if you don't hear back from me, that is why.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
-
- Junior Member
- Posts: 246
- Joined: Thu Jun 28, 2007 8:49 pm
That flash id is not listed in the flash.xml, hence the error. Or you are looking in the wrong location and that is not the actual flash id, but just some random data at the location you probed the flash.jspan wrote:When I try to detect the flash, I get an unable to detect flash error followed by this code: 4343,6f6f. Anyone have any ideas?
Go to the "Tools" menu at the top, and select "Config" from the drop-down list.jspan wrote:And why the heck does the software say that I am testing a DSR401?
In the pop-up window select "DishIRD" under category, "BDM" under protocol, and "DSR9XX" under target select.
Once you have the target setup correctly try this
Code: Select all
reset 1
init
flshdct ff800000
Good Luck
-
- Junior Member
- Posts: 10
- Joined: Tue Jul 10, 2012 10:57 am
Once you have the target setup correctly try this
If that flash window does not work then try the other memory locations in the TDSR9XX.xml
Good Luck[/QUOTE]
Thanks very much for taking the time to respond. I tried what you suggested and the software returned this...
"unknown flash type. report ffff,efef"
I want so much for this to work because I have seen the wonderful upgrade that others have reported. I seem to be the only person that can't get this to work. I have downloaded the software and instructions from https://sites.google.com/site/4dtvmapma ... -zip-files and followed the instructions step by step. It still won't work. What's really strange is that the instructions supplied at this website say nothing about detecting the flash. Seems very odd to me.
You also said "If that flash window does not work then try the other memory locations in the TDSR9XX.xml". I opened the file with the xml viewer but I don't really see any other addresses in the file.
I'm beginning to think I threw $68 away.
Code: Select all
reset 1
init
flshdct ff800000
Good Luck[/QUOTE]
Thanks very much for taking the time to respond. I tried what you suggested and the software returned this...
"unknown flash type. report ffff,efef"
I want so much for this to work because I have seen the wonderful upgrade that others have reported. I seem to be the only person that can't get this to work. I have downloaded the software and instructions from https://sites.google.com/site/4dtvmapma ... -zip-files and followed the instructions step by step. It still won't work. What's really strange is that the instructions supplied at this website say nothing about detecting the flash. Seems very odd to me.
You also said "If that flash window does not work then try the other memory locations in the TDSR9XX.xml". I opened the file with the xml viewer but I don't really see any other addresses in the file.
I'm beginning to think I threw $68 away.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Your beginning to think you threw away $68 in What? The USBBDM NT? The tool works, but the tool will not connect or solder itself. So don't blame the tool for your short comings.jspan wrote: Thanks very much for taking the time to respond. I tried what you suggested and the software returned this...
"unknown flash type. report ffff,efef"
I want so much for this to work because I have seen the wonderful upgrade that others have reported. I seem to be the only person that can't get this to work. I have downloaded the software and instructions from https://sites.google.com/site/4dtvmapma ... -zip-files and followed the instructions step by step. It still won't work. What's really strange is that the instructions supplied at this website say nothing about detecting the flash. Seems very odd to me.
You also said "If that flash window does not work then try the other memory locations in the TDSR9XX.xml". I opened the file with the xml viewer but I don't really see any other addresses in the file.
I'm beginning to think I threw $68 away.
Why don't you take USBBDM up on the TeamView Session? Clearly if others are able to program this target then the Problem is on your side...........
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 246
- Joined: Thu Jun 28, 2007 8:49 pm
Do you mean "flshdct"? "flashdec" is unsupported command.usbbdm wrote:I think the memory map is not right. I believe the flash is at address 0 not ff800000
Try command flashdec 0.
He already did flshdct. NT says unknown flash.....report....4343,6f6f
But DSR-920 has AMD 29F160D flash. According to datasheet he should get 0001,22D2 or 0001,22D8.
@jspan
Do you even have the mapmaster software yet?
Those instructions only tell how to read and save.
Maybe you only edit the battery-backed sram.
Code: Select all
reset 1
init
ldram nvram (select your new bin file after editing with mapmaster software)
setram nvram
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 13 guests