VOLVO CEM VIDEO QUESTION

USB BDM software. Bug report.
Post Reply
keyinminutes
Junior Member
Posts: 2
Joined: Fri Nov 19, 2021 1:02 pm

VOLVO CEM VIDEO QUESTION

Post by keyinminutes »

At one point when the video mentions that the dump hasnt been flipped, what program does he open up the file in? And where can it be gotten?

Thank you
usbbdm
Junior Member
Posts: 8786
Joined: Mon Jul 18, 2005 9:33 pm

Re: VOLVO CEM VIDEO QUESTION

Post by usbbdm »

The software read the ECU properly. If you have the programmer read it is flipped. The command "hilo" can help you flip the byte order.
Guest

Re: VOLVO CEM VIDEO QUESTION

Post by Guest »

Ok and a couple other question. At one point I read a dump but it didn’t show under control it showed under EEPROM? But in the video the tab shows FLASH? Is this just a change in software versions? Because control showed all F’s.

Also I noticed when it says move the 2 script files there is one norflash and the volvocem xml where can one obtain the 2 files?

And lastly even after connecting all the wires and the 12V power supply it always says BDM OFF in bottom right hand corner. How do you make this come on?
Post Reply