sti5202 cannot get box ON

Here we discuss the JTAG on platforms. CPU,CPLD etc.
Post Reply
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

sti5202 cannot get box ON

Post by _hrc_ »

HI

Use pin 13 as TRST

Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: B600V4
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202


Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: B600V4A
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202


Copyright (C) 2010-2015
USB JTAG NT 0.76
Target: SV8000
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202
-detect
IDCODE 2D42C041
STi STi5202



No achievement "box on" any suggestions?
have the flash S29GL064

http://pdf1.alldatasheet.com/datasheet- ... FI020.html
usbbdm
Junior Member
Posts: 8842
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Try slower JTAG clock. Not sure what kind of box you have. What is your hardware ID? Some older (hardware id < 4000) cannot do ST40 target.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

sti5202 cannot get box ON

Post by _hrc_ »

usbbdm wrote:Try slower JTAG clock. Not sure what kind of box you have. What is your hardware ID? Some older (hardware id < 4000) cannot do ST40 target.


Box Coship 6750T

clock 3/6/12

-detect
IDCODE 2D42C041
STi STi5202
========================================
DeviceId = 0x2D42C041
OptionId = 0x0043E20D
PrivateId = 0x02611124
ExtraId = 0x00000000
========================================
HUDI Internal Status
----------------------------------------
SR = 0x00000000
FPSCR = 0x00000000
CCR = 0x00
FRQCR = 0x0000
EXPEVT = 0x0000
INTEVT = 0x0000
EBUS = 0x00000000
IBUS = 0x00000000
SBUS = 0x00000000
EBTYPE = 0x00
SBTYPE = 0x00
CMF = 0x00
SCMF = 0x00
MMUCRAT = 0x00
PTEH = 0x00
STATUS = 0x00


regards
usbbdm
Junior Member
Posts: 8842
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

I mean your JTAG NT ID.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

sti5202 cannot get box ON

Post by _hrc_ »

I bought the USBJTAG NT on October, 2008. So I cant read the label. Do you have the register to know the ID that you send me? or if I open it the ID is inside? My USBJTAG NT have the original case. Regards
usbbdm
Junior Member
Posts: 8842
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

_hrc_ wrote:I bought the USBJTAG NT on October, 2008. So I cant read the label. Do you have the register to know the ID that you send me? or if I open it the ID is inside? My USBJTAG NT have the original case. Regards
I am pretty sure it does not support ST40 core. You can get hardware ID by go to help->about.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

sti5202 cannot get box ON

Post by _hrc_ »

My ID is JTAG00001032029, It support the version ST40? If it doesnt support it, can I do an update (I have tools to change any type SMD) or I have to buy a new one?


regards
usbbdm
Junior Member
Posts: 8842
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

_hrc_ wrote:My ID is JTAG00001032029, It support the version ST40? If it doesnt support it, can I do an update (I have tools to change any type SMD) or I have to buy a new one?


regards
It is the code in CPLD chip not something you can do. 10xx is for sure cannot support ST40.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

sti5202 cannot get box ON

Post by _hrc_ »

Hi

The code is EPM3064ATC44 , support ST40?

regards
usbbdm
Junior Member
Posts: 8842
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Your USB JTAG NT cannot support ST40. You cannot fix it on your end.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

Post by _hrc_ »

usbbdm wrote:Your USB JTAG NT cannot support ST40. You cannot fix it on your end.

With the new usbjtag detected !!!!

-detect
IDCODE 2D42C041
STi STi5202
Found Address= a0000000 CFI AMD064

-regs 1
-detect
IDCODE 2D42C041
STi STi5202
========================================
DeviceId = 0x2D42C041
OptionId = 0x0043E20D
PrivateId = 0x02611124
ExtraId = 0x00000000
========================================
HUDI Internal Status
----------------------------------------
SR = 0x700000F1
FPSCR = 0x00040001
CCR = 0x0B
FRQCR = 0x0E0A
EXPEVT = 0x0000
INTEVT = 0x1E88
EBUS = 0x00000000
IBUS = 0xFC000018
SBUS = 0xFFF00008
EBTYPE = 0x00
SBTYPE = 0x00
CMF = 0x00
SCMF = 0x00
MMUCRAT = 0x00
PTEH = 0x00
STATUS = 0x00
Found Address= a0000000 CFI AMD064


Could include flash S29GL064

http://pdf1.alldatasheet.com/datasheet- ... FI020.html


Thank you
usbbdm
Junior Member
Posts: 8842
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

I think the existing software will work for your target. No need to add the flash.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

Post by _hrc_ »

I can read, verify ok
but when writing stops working
usbbdm
Junior Member
Posts: 8842
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

_hrc_ wrote:I can read, verify ok
but when writing stops working
Show me so I can see where is the problem.
_hrc_
Junior Member
Posts: 40
Joined: Thu May 01, 2008 6:26 am

Post by _hrc_ »

No problem, in long cables
It works perfect

Thank you
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest