help please s25fl064p

deepakuklana · Post by **deepakuklana** » Sat Feb 08, 2014 3:58 pm

this delete by poster

Post by **usbbdm** » Sat Feb 08, 2014 5:47 pm

deepakuklana wrote:hi sir please tell me usbjtag can support s25fl064p flash memory

S25FL064P
64-Mbit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus

S25FL064P is a 3.0 Volt (2.7V to 3.6V),

Sure it can support it.
Do you program it on PCB or you simply want to program the chip?

deepakuklana · Post by **deepakuklana** » Mon Feb 10, 2014 12:20 am

i am simply want to program the chip

please tell me how can done it

how to connect flash ic with usbjtagnt?

Post by **usbbdm** » Mon Feb 10, 2014 10:14 am

Here is how.

deepakuklana · Post by **deepakuklana** » Mon Feb 10, 2014 3:17 pm

hi sir please tell me how connection between usb jtag and flash ic s25fl064p

flsh ic usbjtag

SO/IO1 == pin 5(TDO)
SI/IO0 == Pin 3(TDI)
SCK == Pin 9(TCK)
CS# == Pin 11(RESET)
GND == Pin 2(GND)
HOLD#/IO3
W#/ACC/IO2
VCC

USB JTAG

help please s25fl064p

delete

Who is online