help please s25fl064p

Here we discuss the JTAG on platforms. CPU,CPLD etc.
Post Reply
deepakuklana
Junior Member
Posts: 37
Joined: Wed Nov 23, 2011 6:32 pm

delete

Post by deepakuklana »

this delete by poster
usbbdm
Junior Member
Posts: 8846
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

deepakuklana wrote:hi sir please tell me usbjtag can support s25fl064p flash memory

S25FL064P
64-Mbit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus

S25FL064P is a 3.0 Volt (2.7V to 3.6V),
Sure it can support it.
Do you program it on PCB or you simply want to program the chip?
deepakuklana
Junior Member
Posts: 37
Joined: Wed Nov 23, 2011 6:32 pm

Post by deepakuklana »

i am simply want to program the chip

please tell me how can done it

how to connect flash ic with usbjtagnt?
usbbdm
Junior Member
Posts: 8846
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Here is how.
deepakuklana
Junior Member
Posts: 37
Joined: Wed Nov 23, 2011 6:32 pm

Post by deepakuklana »

hi sir please tell me how connection between usb jtag and flash ic s25fl064p

flsh ic usbjtag

SO/IO1 == pin 5(TDO)
SI/IO0 == Pin 3(TDI)
SCK == Pin 9(TCK)
CS# == Pin 11(RESET)
GND == Pin 2(GND)
HOLD#/IO3
W#/ACC/IO2
VCC
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest