Heres a Little Tut On how to program one Control to work on 2 Different Boxes
Digital & HD. Most Boxes with Current Firmware will work with the Default ( Cable ) Button, However some HD's ( Mostly ones that don't have Current Firmware ) Won't. Heres a way to program a Control to have Both Options on One Control.
Enjoy
PROGRAM REMOTE FOR BOTH DIGITAL AND HD BOXES
*********************************************
Press & Release Cable Button
Press & Hold Setup, Light Blinks 2 Times
Enter 982, Light Blinks 4 Times
Press & Hold Setup, Light Blinks 2 Times
Enter 01376, Light Blinks 2 Times
Press & Release Aux Button
Press & Hold Setup, Light Blinks 2 Times
Enter 01982, Light Blinks 2 Times
Press & Hold Setup, Light Blinks 2 Times
Enter 982, Light Blinks 2 Times = This Last Locks Programming
*********************************************
Most boxes will work with the Cable Button, If you find
a box that won't work Press the AUX button and Try again
90% of the boxes with Current Firmware will work with
the cable Button
*********************************************
By CAPONE
Your Welcome Jeff.
If you want to Program a Control for Either Digital Or HD Only Follow these Steps.
PROGRAM REMOTE FOR DIGITAL BOXES
*********************************************
Press & Release Cable Button
Press & Hold Setup, Light Blinks 2 Times
Enter 982, Light Blinks 4 Times
Press & Hold Setup, Light Blinks 2 Times
Enter 01376, Light Blinks 2 Times
Press & Hold Setup, Light Blinks 2 Times
Enter 982, Light Blinks 2 Times = This Last Locks Programming
PROGRAM REMOTE FOR HD BOXES
*********************************************
Press & Release Cable Button
Press & Hold Setup, Light Blinks 2 Times
Enter 982, Light Blinks 4 Times
Press & Hold Setup, Light Blinks 2 Times
Enter 01982, Light Blinks 2 Times
Press & Hold Setup, Light Blinks 2 Times
Enter 982, Light Blinks 2 Times = This Last Locks Programming
*********************************************
By CAPONE
For example to assign MyDVR:
1) Press Cable
2) Press and hold Setup until 2 blinks
3) Enter 994 (should see another 2 blinks)
4) Tap Setup (don't hold it.)
5) Enter 43205
6) Tap MyDVR
The remote should blink twice to indicate that it recognized the procedure.