Hello, I am interested in the ulink nand but I would like to know if it prevents backfeeding in order to have a proper dump and avoid short-circuits when using the clip.
Thanks
ulink nand backfeeding
-
- Junior Member
- Posts: 9026
- Joined: Mon Jul 18, 2005 9:33 pm
Re: ulink nand backfeeding
There are two ways to apply power to the flash.
One is using 3.3v from the u-Link NAND. The other is to use the 3.3v from target board.
If you configured the power from 3.3v on target it will not back feeding to the u-Link NAND.
So far it is still new and I am working with people to get more experience.
As long as you DO NOT try to make contact (clip) while either side has power it is quite safe. However if you find connection is not stable and try to "fix" it while the power is on, the risk is very high. This applies to SPI flash as well.
One is using 3.3v from the u-Link NAND. The other is to use the 3.3v from target board.
If you configured the power from 3.3v on target it will not back feeding to the u-Link NAND.
So far it is still new and I am working with people to get more experience.
As long as you DO NOT try to make contact (clip) while either side has power it is quite safe. However if you find connection is not stable and try to "fix" it while the power is on, the risk is very high. This applies to SPI flash as well.
-
- Junior Member
- Posts: 2
- Joined: Fri Nov 06, 2020 5:27 pm
Re: ulink nand backfeeding
Ok, how about using it on MR33? Will it install openwrt? How would be the process?
-
- Junior Member
- Posts: 9026
- Joined: Mon Jul 18, 2005 9:33 pm
Re: ulink nand backfeeding
I will get MR33 soon and will make a video.
Sure it can do openwrt but I will see if I need some dump file from someone or I can make it myself.
Sure it can do openwrt but I will see if I need some dump file from someone or I can make it myself.
-
- Junior Member
- Posts: 9026
- Joined: Mon Jul 18, 2005 9:33 pm
Re: ulink nand backfeeding
I can confirm programming MR33 is very easy with u-Link NAND. It only draws 90ma for 3.3v to operate. It makes the connection very easy. Simply use the 3.3v from the u-Link NAND.
-
- Junior Member
- Posts: 1
- Joined: Tue Jun 01, 2021 2:05 pm
Re: ulink nand backfeeding
I'm in the US and have a few MR33s with uboot 2017 and would like to see if I could send them to you to flash for me. I would have pm you but I don't have access to do that yet. I can't find a NAND flasher for a good price to justify it at this time. If you could post a link to a 360 clip and programmer I could use that would be appreciated.
Who is online
Users browsing this forum: No registered users and 2 guests