USBJTAGNT Hardware not recognized
-
- Junior Member
- Posts: 177
- Joined: Thu Feb 26, 2009 9:50 am
- Location: S FL
- Contact:
USBJTAGNT Hardware not recognized
I am using Ubuntu 10.10 x64. The software loads properly but will not detect when the USBJTAGNT is plugged into the usb. It always says in the status bar 'USBJTAGNT Not Connected'. I also tried the fix in '/lib/udev/rules.d/50-udev-default.rules' which didn't help the problem.
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
I will try to fix it on ubuntu THis is related to the permission. Can you try to use chmod to modify the usb device?ak4d7 wrote:I am using Ubuntu 10.10 x64. The software loads properly but will not detect when the USBJTAGNT is plugged into the usb. It always says in the status bar 'USBJTAGNT Not Connected'. I also tried the fix in '/lib/udev/rules.d/50-udev-default.rules' which didn't help the problem.
-
- Junior Member
- Posts: 177
- Joined: Thu Feb 26, 2009 9:50 am
- Location: S FL
- Contact:
-
- Junior Member
- Posts: 8
- Joined: Mon Apr 26, 2010 6:11 pm
Hi
I use ubuntu 10.10 32bit usbjtag nt 0.45a
doesnt recognize usbjtag - it says disconnected, every 5 seconds it changes to "connected" for half second then goes back to disconnected
I did change 664 to 666 in line 57, also i did try to run as su (sudo), it wont help
also i cant active it (is it off?)
I use ubuntu 10.10 32bit usbjtag nt 0.45a
doesnt recognize usbjtag - it says disconnected, every 5 seconds it changes to "connected" for half second then goes back to disconnected
I did change 664 to 666 in line 57, also i did try to run as su (sudo), it wont help
also i cant active it (is it off?)
-
- Junior Member
- Posts: 8
- Joined: Mon Apr 26, 2010 6:11 pm
I dont use NT and UJmodem at the same time (i know they dont work together)
looks like i have libusb installed
Synaptic package manager says these are installed
libusb-0.1-4 2:0.1.12-15ubuntu2
libusb-1.0-0 2:1.0.8-2
libusb-1.0.0-dev 2:1.0.8-2
libusb-dev 2:0.1.12-15ubuntu2
I also did install those:
http://sourceforge.net/projects/libusb/ ... 2/download
usbjtag soft still same problem disconnected every ~5 seconds it shows connected for 1 sec then goes back to disconnected
any help or its just ubuntu 10.10- maybe i should go back to older version?
looks like i have libusb installed
Synaptic package manager says these are installed
libusb-0.1-4 2:0.1.12-15ubuntu2
libusb-1.0-0 2:1.0.8-2
libusb-1.0.0-dev 2:1.0.8-2
libusb-dev 2:0.1.12-15ubuntu2
I also did install those:
http://sourceforge.net/projects/libusb/ ... 2/download
usbjtag soft still same problem disconnected every ~5 seconds it shows connected for 1 sec then goes back to disconnected
any help or its just ubuntu 10.10- maybe i should go back to older version?
-
- Junior Member
- Posts: 177
- Joined: Thu Feb 26, 2009 9:50 am
- Location: S FL
- Contact:
http://usbjtag.com/vbforum/showpost.php ... ostcount=9 worked for me
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Download latest software. 0.45a.poke708 wrote:I dont use NT and UJmodem at the same time (i know they dont work together)
looks like i have libusb installed
Synaptic package manager says these are installed
libusb-0.1-4 2:0.1.12-15ubuntu2
libusb-1.0-0 2:1.0.8-2
libusb-1.0.0-dev 2:1.0.8-2
libusb-dev 2:0.1.12-15ubuntu2
I also did install those:
http://sourceforge.net/projects/libusb/ ... 2/download
usbjtag soft still same problem disconnected every ~5 seconds it shows connected for 1 sec then goes back to disconnected
any help or its just ubuntu 10.10- maybe i should go back to older version?
Install libusb 1.0. Run only NT or UJmodem. Do not run both at the same time.
If you use 64 bit Linux, make sure the 32 bit libraries are installed.
I can provide remote help if you can use teamviewer on linux.
-
- Junior Member
- Posts: 8
- Joined: Mon Apr 26, 2010 6:11 pm
thanks ak4d7
http://usbjtag.com/vbforum/showpost....72&postcount=9 worked for me too
i just had to restart system
after that activation window pop up
http://usbjtag.com/vbforum/showpost....72&postcount=9 worked for me too
i just had to restart system
after that activation window pop up
-
- Junior Member
- Posts: 177
- Joined: Thu Feb 26, 2009 9:50 am
- Location: S FL
- Contact:
-
- Junior Member
- Posts: 177
- Joined: Thu Feb 26, 2009 9:50 am
- Location: S FL
- Contact:
On 64bit you need to use 32bit Libusb, for the 32bit libusb on ubuntu x64 use:
wget http://ftp.us.debian.org/debian/pool/ma ... 2_i386.deb
dpkg-deb -x libusb-1.0-0_1.0.8-2_i386.deb .
mv ./lib/* /lib32
Who is online
Users browsing this forum: No registered users and 1 guest