Two Arris TM802G received today.
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Two Arris TM802G received today.
Hope I can do something with it.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
WOW It took me less than 30 Min. And I have NO Clue what I was Doing.usbbdm wrote:After two nights work I was able to detect the flash. However the read data was empty. I will study the datasheet of the chip and see if development is needed for this flash.
I played with XML and got it to Work when you was on Vacation. I sent you a PM about it in case you wanted to check the XML and Flash XML MOD. You Never answered. Layout of Flash is Almost exactly as an DCP3000.
U-Boot,ENV1,ENV2,UBFI1 and UBFI2 Are in the Same location. The LOG CFG and Blank Is where i See the Difference. But XML does work for Making Full Backup and Changing Firmware.
Heres what i did MODDED Flash XML to add Flash Info and Used Same DPC3000 XML Only I changed the ID to TM802G. Worked First Try.
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
What is your ISP pin? Mine was on U401 but can only detect the flash. Maybe I should try the other modem.CAPONE wrote:WOW It took me less than 30 Min. And I have NO Clue what I was Doing.
I played with XML and got it to Work when you was on Vacation. I sent you a PM about it in case you wanted to check the XML and Flash XML MOD. You Never answered. Layout of Flash is Almost exactly as an DCP3000.
U-Boot,ENV1,ENV2,UBFI1 and UBFI2 Are in the Same location. The LOG CFG and Blank Is where i See the Difference. But XML does work for Making Full Backup and Changing Firmware.
Heres what i did MODDED Flash XML to add Flash Info and Used Same DPC3000 XML Only I changed the ID to TM802G. Worked First Try.
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
I did not say I need XML. I Modded DPC3000 XML and Added Flash info into Flash XML to make it Work. I Just Uploaded so you can try it and make Changes if Needed Since you Said your Read contained No INFO.usbbdm wrote:Why you need new flash.xml? The existing flash.xml works fine for me.
Also I did Not Use ISP, External Power to Pin 2 of Flash was Used. All I ddi was MOD to XMLs. I did not have a TM802G At the Time to Look for ISP. Now I do have one that I have not had time to Play With.
So these XMLs wit ISP U401 Worked for you?
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Oh, that is different. That is why it takes you 30min. The ISP is the one I work on.CAPONE wrote:I did not say I need XML. I Modded DPC3000 XML and Added Flash info into Flash XML to make it Work. I Just Uploaded so you can try it and make Changes if Needed Since you Said your Read contained No INFO.
Also I did Not Use ISP, External Power to Pin 2 of Flash was Used. All I ddi was MOD to XMLs. I did not have a TM802G At the Time to Look for ISP. Now I do have one that I have not had time to Play With.
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Who is online
Users browsing this forum: No registered users and 2 guests