Sonicview HD had been received.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Sonicview HD had been received.
However, due to the value declared on the custom forms, I have to pay $33 to pickup. I will start to investigate the possibility to add support of Sti710x. Next time if anyone want to donate device to develop, please write done the value as low as possible and as a gift.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Does anyone have a program that declare can read it? Also there seem to have a software called cpld_ejtag_tt which can do ST40. If anyone have a copy of the software I would like to take a look. I know it needs special hardware but the software package might help a little bit. I cannot find the latest software that supports ST40 CPU for download.
-
- Junior Member
- Posts: 267
- Joined: Sun Feb 17, 2008 1:13 pm
stburner
I was trying to find stburner_mb411_stb7109.zip but all the downloads were corrupt and incomplete.
I finally found a good one at
http://upload.sat-elita.net.pl/content.php?id=1650
it is just listed as n.zip
you hit the Pobierz button at the bottom of the page to download and save.
Maybe that will help.
I finally found a good one at
http://upload.sat-elita.net.pl/content.php?id=1650
it is just listed as n.zip
you hit the Pobierz button at the bottom of the page to download and save.
Maybe that will help.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Thanks. Everything helps.slugworth wrote:I was trying to find stburner_mb411_stb7109.zip but all the downloads were corrupt and incomplete.
I finally found a good one at
http://upload.sat-elita.net.pl/content.php?id=1650
it is just listed as n.zip
you hit the Pobierz button at the bottom of the page to download and save.
Maybe that will help.
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
I have a littler better understanding how this works but the information is somewhat encrypted.
The IR length for SV8000 should be 5 bit. In the urjtag patch, the tapmux uses 5 bits IR length. However, in all the HUDI code it use 8 bit IR length. 8 Bit cannot be true.
ST7100 has several cores, one is ST40 and there are TWO ST231 for audio and video. I think the key is to access ST40 core (HUDI) to be able to program the flash not ST231( DSU).
I will continue working on this.
The IR length for SV8000 should be 5 bit. In the urjtag patch, the tapmux uses 5 bits IR length. However, in all the HUDI code it use 8 bit IR length. 8 Bit cannot be true.
ST7100 has several cores, one is ST40 and there are TWO ST231 for audio and video. I think the key is to access ST40 core (HUDI) to be able to program the flash not ST231( DSU).
I will continue working on this.
Who is online
Users browsing this forum: No registered users and 1 guest