Is this gonna be supported

Use USB JTAG NT on VOIP device so we can unlock the device or configure the device.
Post Reply
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

Unless you click on something By Accident. Just trying to Detect Will Not Brick the Target.
fuddi007
Junior Member
Posts: 51
Joined: Thu Jun 24, 2010 12:59 pm

Post by fuddi007 »

not that i know of... its all good.. once the BOSS figures out this flash.. i'll get another 802g and copy the flash.
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

fuddi007 wrote:not that i know of... its all good.. once the BOSS figures out this flash.. i'll get another 802g and copy the flash.
More than Likely Just the Boot & maybe the Firmware. This Way You Don't Lose the Original Modem CERTS. ;)
Whammy45
Junior Member
Posts: 30
Joined: Sun May 22, 2011 4:50 am

Post by Whammy45 »

Well am glad to see that someone else have a interest in this baby will donate one to the boss for testing if he wants just say the word also I didn't try powering up pin 2 I was trying pin 1 all the time will test pin 2 and post the results later good testing guys.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Whammy45 wrote:Well am glad to see that someone else have a interest in this baby will donate one to the boss for testing if he wants just say the word also I didn't try powering up pin 2 I was trying pin 1 all the time will test pin 2 and post the results later good testing guys.
I am currently working on new STi 710x target. This is a huge job. I could take a look of this target if someone donate the device. This has to be done after the STi work unless it is easy and not take more than two days of work.
fuddi007
Junior Member
Posts: 51
Joined: Thu Jun 24, 2010 12:59 pm

Post by fuddi007 »

usbbdm wrote:I am currently working on new STi 710x target. This is a huge job. I could take a look of this target if someone donate the device. This has to be done after the STi work unless it is easy and not take more than two days of work.
you got PM
babyoche
Junior Member
Posts: 20
Joined: Wed Apr 28, 2010 5:47 pm

Post by babyoche »

will donate as many as you need with battery.
now I did connected the spi to pin 5 of the small chip next to the chip (don't know the name) that we connect the 5 others wire to it and the same thing that happens to the 6120 and 6220 happened to the 802 that all the light goes out but I only get


Copyright (C) 2010,2011,2012
USB JTAG NT 0.54
Target: TM502G
-detect
IDCODE 00000000
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

I think TM502G xml is not for this modem if you use SPI.
babyoche
Junior Member
Posts: 20
Joined: Wed Apr 28, 2010 5:47 pm

Post by babyoche »

what should I use? I tried everything, including 6120 and 6220 setting
I need to try a different spi point or how to power it
fuddi007
Junior Member
Posts: 51
Joined: Thu Jun 24, 2010 12:59 pm

Post by fuddi007 »

babyoche wrote:what should I use? I tried everything, including 6120 and 6220 setting
I need to try a different spi point or how to power it
None of those will work... we have to wait for a new XML
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

babyoche wrote:what should I use? I tried everything, including 6120 and 6220 setting
I need to try a different spi point or how to power it
You Must Be Very Special Member. :D I dont see any Target for 6220. LOL
babyoche
Junior Member
Posts: 20
Joined: Wed Apr 28, 2010 5:47 pm

Post by babyoche »

right, neither for 6120
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

babyoche wrote:right, neither for 6120
SB6120 Has Been Suported for a long time Now.
babyoche
Junior Member
Posts: 20
Joined: Wed Apr 28, 2010 5:47 pm

Post by babyoche »

so is the 6220
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

babyoche wrote:so is the 6220
SB6120 and SB6220 Are essencialy the same thing Therefore there is No SB6220 Target in the software Only SB6120. DUH. :D
So My Point is, This is a DUMB Statement.

I tried everything, including 6120 and 6220 setting

What Settings are you talking about? :D
Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests