VT2X42 firmware

Use USB JTAG NT on VOIP device so we can unlock the device or configure the device.
nikkola
Junior Member
Posts: 4
Joined: Thu Mar 10, 2011 10:28 pm

Post by nikkola »

usbbdm wrote:Do you get registered. Which service provider do you use?
I registered:
Powervoip.com
Voipdiscount.com
Zadarma.com
Vonage.com

To others country i can make calls with all this providers. But not to Russia. Maybe problems with codecs?
nikkola
Junior Member
Posts: 4
Joined: Thu Mar 10, 2011 10:28 pm

Hi

Post by nikkola »

So. What do you think?
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

You might need to use tftp to upgrade the dial plan. The dial plan might block you complete the digit collection and dial out.
To diag this issue, use a hub( not router) and connect PC and the box, see what SIP INVITE is sent out. If the SIP INVITE is sent with wrong TO header (very likely) then you need to fix the dial plan.
I do not have time to make another firmware that has all the settings (like codec preference or dial plan). If you are interested you can install a linux box and unsquash the firmware and then pack it again.
voipcs
Junior Member
Posts: 3
Joined: Sat Mar 12, 2011 9:52 am

freephoneline changed

Post by voipcs »

hi
freephoneline.ca there now blocking or terminate your phone line if you don't use there setting

they must have setting


<REG_EXPIRE_TIMER>360000</REG_EXPIRE_TIMER>

that is 1 hour ( vt2442 sending to freephoneline 600 sec

and freephoneline DTMF voice mail can not working just *98 working even if you press 1 no function

this must be changed

DIGIT_RELAY_MODE>5</DIGIT_RELAY_MODE>

dial plan can not change :

for acanac

*123|[2-9]xxxxxxxxx|1[2-9]xxxxxxxxx|911|011xxxxx.T

any idea ? how can set it as default ?

i know can update the xml file and it will work

after factory reset it's gone :rolleyes:
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

voipcs wrote:hi
freephoneline.ca there now blocking or terminate your phone line if you don't use there setting

they must have setting


<REG_EXPIRE_TIMER>360000</REG_EXPIRE_TIMER>

that is 1 hour ( vt2442 sending to freephoneline 600 sec

and freephoneline DTMF voice mail can not working just *98 working even if you press 1 no function

this must be changed

DIGIT_RELAY_MODE>5</DIGIT_RELAY_MODE>

dial plan can not change :

for acanac

*123|[2-9]xxxxxxxxx|1[2-9]xxxxxxxxx|911|011xxxxx.T

any idea ? how can set it as default ?

i know can update the xml file and it will work

after factory reset it's gone :rolleyes:
You can modify the default setting by unpack the firmware and pack back.
I think the main reason for freephoneline not working is they block the account that is hacked. You have to pay them $50 to continue use the service.
voipcs
Junior Member
Posts: 3
Joined: Sat Mar 12, 2011 9:52 am

it's paid account

Post by voipcs »

hi thanks for your fast response ..

i paid this freephonline account .... i know what's you mean but i am not that guy using like

$50 i paid

i am doing this one sins 2008

there is many vt2x42 unlocked from your firmware and it's work fine

now i am getting email from freephoneline it's say
Hi there,

Your devices are not configured correctly- details below:

sip:[email protected]:5060;transport=UDP TITAN-1050 2014-02-21 21:31:25 2014-02-21 21:41:25 Register expiry 600

sip:[email protected]:5060;transport=UDP VT2142 2014-02-21 21:33:09 2014-02-21 21:43:09 Register expiry 600

sip:[email protected]:5060;transport=UDP VT2142 2014-02-21 21:37:16 2014-02-21 21:47:16 Register expiry 600

sip:[email protected]:5060;transport=UDP TITAN-1050 2014-02-21 21:35:29 2014-02-21 21:45:29 Register expiry 600
Please ensure that your ATA devices are setup as per the FPL guidelines:

http://support.freephoneline.ca/entries ... redentials

The items below require your attention asap:

Registration Interval:3600 seconds (1 hour)

Registration Expiry: 3600 seconds (1 hour)

Failed Registration Re-Try Interval:120 seconds

Please make the changes to your devices and let us know if it's still an issue.


those are setting now must be

Inbound/Outbound Proxy: voip.freephoneline.ca
Registration Expires: 3600
Use Preferred Codec: G729a
Use Preferred Codec Only: No
RTP Packet Size: 0.020
Ring Tone Frequency: 52
Ring Tone Voltage: 90

firmware i don't have any idea how to modify

can you modify for me ?

if can change that setting : menu option that's also good most of time edit the xml file and upload

it's work fine how every time i have to update that xml file
voipcs
Junior Member
Posts: 3
Joined: Sat Mar 12, 2011 9:52 am

Post by voipcs »

usbbdm wrote:You can modify the default setting by unpack the firmware and pack back.
I think the main reason for freephoneline not working is they block the account that is hacked. You have to pay them $50 to continue use the service.

because your unlocked firmware: there is NO DTMF option there for can not get the voice mail
any way get this option ?
Image


see the image zip or that image
You do not have the required permissions to view the files attached to this post.
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests