Microchip 11AAxxx chip support.

Routers, VOIP devices, etc.
Post Reply
Boxnut
Junior Member
Posts: 22
Joined: Wed Feb 12, 2020 2:46 am
Location: Northwest US
Contact:

Microchip 11AAxxx chip support.

Post by Boxnut »

Hi people.
I have been trying to read a 1 wire (uniwire) eeprom and just can't get it to read
The chip is 11LC160.
I have exhausted all the parameters for a DIY XML.
I really would like support for this series of chip.
Just guessing the DLL does not support the correct protocol.
My device is a new J-LINK, and J-LINK v1.45 software.
I have the Microchip datasheet if that can help.
TYIA
boxnut.
Some of my information may be incorrect, incomplete,or just plain wrong. Seems I am human. :D
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: Microchip 11AAxxx chip support.

Post by usbbdm »

I do not have the chip to test against. This is new protocol that needs developemnt.
Boxnut
Junior Member
Posts: 22
Joined: Wed Feb 12, 2020 2:46 am
Location: Northwest US
Contact:

Re: Microchip 11AAxxx chip support.

Post by Boxnut »

I got that. Only 2 differences between this and the Dallas DS2431 is 2 to 5.5 volt vcc and 16K X 8 instead of 1K X 8
My setup will read the Dallas device but not the Microchip.
My goal is to replace the Dallas IC with the Microchip. adding VCC should be the only issue.
It will be middle of January before I can send you a smple, and can link the datasheet.
Thanks for your time.
boxnut.
Some of my information may be incorrect, incomplete,or just plain wrong. Seems I am human. :D
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests