Vod and ppv problem

PPV issues.
Locked
ilavu
Junior Member
Posts: 133
Joined: Mon Feb 08, 2010 9:47 am

Vod and ppv problem

Post by ilavu »

Here is the info from diag menu.

Screen #2
DATA * SNR 24 DB GOOD
EMM DATA *
CARRIER LOCK YES COUNT
HUNT MODE NONE
CUR FREQ 75.25
LKC 75.25
EMM PRVDR ID 0X0001

SCREEN # 9
STATUS: -
FREQUENCY: 11.744
LEVEL : 40
IPPV : ENABLED

13 05-26-08 13:23:41
N/A

SCREEN # 10
ASTB VALD 264 13 720

00C-2500 03.46 ENABLED
TV_GUIDE 78.33 ENABLED
SCV2500_ 06.21 ENABLED
MACGCLNT 34.25 ENABLED

SCREEN # 12

IP : 0.0.0.0
UPM : 0X113279
UPSTREAM ID : 0X0000
DOWNSTREAM ID : 0X0000
STATE : UNCONFIG
MAC ABORT CNTR : 0000

GOOD PACKETS :
ERROR PACKETS :

0 THROUGH 14 ALL UNUSED

any help?
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

ilavu wrote:Here is the info from diag menu.

Screen #2
DATA * SNR 24 DB GOOD
EMM DATA *
CARRIER LOCK YES COUNT
HUNT MODE NONE
CUR FREQ 75.25
LKC 75.25
EMM PRVDR ID 0X0001

SCREEN # 9
STATUS: -
FREQUENCY: 11.744
LEVEL : 40
IPPV : ENABLED

13 05-26-08 13:23:41
N/A

SCREEN # 10
ASTB VALD 264 13 720

00C-2500 03.46 ENABLED
TV_GUIDE 78.33 ENABLED
SCV2500_ 06.21 ENABLED
MACGCLNT 34.25 ENABLED

SCREEN # 12

IP : 0.0.0.0
UPM : 0X113279
UPSTREAM ID : 0X0000
DOWNSTREAM ID : 0X0000
STATE : UNCONFIG
MAC ABORT CNTR : 0000

GOOD PACKETS :
ERROR PACKETS :

0 THROUGH 14 ALL UNUSED

any help?
How Much Time Have you given it to Get an IP or Even Download the Guide?????????????

As Soon as you connect the Box It's not going to GET AN IP.
and 0x0000 on Upstream and Downstream Is not good. Ether not locking Freq Or your not giving It enough Time. If you Have picture then More Likely Your Not giving it enough time.

UPSTREAM ID : 0X0000
DOWNSTREAM ID : 0X0000
STATE : UNCONFIG

This UNCONFIG IS NO GOOD. If that does Not Change you will Have to Flash a Good BackUp to Get out of the UNCONFIG STATE.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
ilavu
Junior Member
Posts: 133
Joined: Mon Feb 08, 2010 9:47 am

Post by ilavu »

The guide loaded about 20 min ago. As for good backup, I let it update by cc. Question is without original backup it will give me all the info needed by updating by cc? This box is previously modified. Does network ID matter? Because I don't have original. State: unconfig any alternate solution?
junctionbox
Junior Member
Posts: 449
Joined: Sat Oct 21, 2006 6:19 am

fresh nvram

Post by junctionbox »

Get a fresh nvram but before you get a new nvram goto dia 12 and make sure it doesnt say unconfig before you save such nvram . Your problem lies in the nvram its in unconfig state bud
junctionbox
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

ilavu wrote:The guide loaded about 20 min ago. As for good backup, I let it update by cc. Question is without original backup it will give me all the info needed by updating by cc? This box is previously modified. Does network ID matter? Because I don't have original. State: unconfig any alternate solution?
Well Here Current firmware is 8.16 for the DCT2224. When I have a Problem I load a 7.96 Firmware BackUp and let it take the Update to 8.16 On its Own. Not Knowing the Original UID is No Problem Becouse Box will go to Original UID on its Own No matter What BackUp I Use.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Locked

Who is online

Users browsing this forum: No registered users and 7 guests