i messed up

Box hardware. Watchdog. Models.
Locked
reeshmd23
Junior Member
Posts: 21
Joined: Fri Aug 27, 2010 4:43 pm

i messed up

Post by reeshmd23 »

I accidently programed a dct 2244 with 400000 200000 instead of 406000 ba000. now its dead anyway to recover from this?
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

reeshmd23 wrote:I accidently programed a dct 2244 with 400000 200000 instead of 406000 ba000. now its dead anyway to recover from this?
If you have the backup you should be OK. If not find the same model and copy from it.
reeshmd23
Junior Member
Posts: 21
Joined: Fri Aug 27, 2010 4:43 pm

Post by reeshmd23 »

i have nvram and code backup is that what u mean? b/c i tried this
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

reeshmd23 wrote:i have nvram and code backup is that what u mean? b/c i tried this
Can you check if it is valid? Like all 00s or ffs are not valid backup.
reeshmd23
Junior Member
Posts: 21
Joined: Fri Aug 27, 2010 4:43 pm

Post by reeshmd23 »

ill try again, i know its valid b/c i have used it before. should i program it to 406000 ba000?
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

If the box is bricked you need to program 400000 200000
reeshmd23
Junior Member
Posts: 21
Joined: Fri Aug 27, 2010 4:43 pm

Post by reeshmd23 »

it worked thanks for the help
reeshmd23
Junior Member
Posts: 21
Joined: Fri Aug 27, 2010 4:43 pm

Post by reeshmd23 »

when i try and restore a nvram and code from one 2244 to another 2244 should i use these commands?

reset 1
init
flshdct code
ldram nvram
ldram code
setram nvram
program 406000 ba000
reeshmd23
Junior Member
Posts: 21
Joined: Fri Aug 27, 2010 4:43 pm

Post by reeshmd23 »

because when i do it this way my dct flashes 6Er 1
any ideas im stumped???????
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

reeshmd23 wrote:when i try and restore a nvram and code from one 2244 to another 2244 should i use these commands?

reset 1
init
flshdct code
ldram nvram
ldram code
setram nvram
program 406000 ba000
reeshmd23 wrote:because when i do it this way my dct flashes 6Er 1
any ideas im stumped???????
Realy????????? :D
Why dont you do some more reading Buddy???????????
reset 1
init
ldram code
ldram nvram
flshdct code
program code
setram nvram

Maybe if you read you will know the comannds. ;)
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
reeshmd23
Junior Member
Posts: 21
Joined: Fri Aug 27, 2010 4:43 pm

Post by reeshmd23 »

i have been im trying man its confusing at first, im suprised i know how to do what im already doing. thanks for the help thats what forums are for
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

reeshmd23 wrote:i have been im trying man its confusing at first, im suprised i know how to do what im already doing. thanks for the help thats what forums are for
Your comannds Is the Problem. Try in order I describe and whould work well.
Let me know how it goes. Sorry for seaming Harsh but most problems Newbies have is Mostly due to Lack of Reading. There so Eager to get going that they tend to skip the Most Important part witch is Reading Before Applying. Also the Most common thing is Thay Fail to Make a Back Up before testing then find themselfs with a Bricked Modem Or Cable Box With No way to Flash back to Original State. I sure Hope this is Not the Case with You. ;)

Good Luck Buddy.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Locked

Who is online

Users browsing this forum: No registered users and 7 guests