Hi recently get hands on many boxes to test with now this box have 29f400
tsops and MB 240684-103-99REV_A my question is which are the settings i need to play with this one.
DCT 1224/1251
-
- Junior Member
- Posts: 20
- Joined: Wed Aug 24, 2005 3:50 pm
- Location: Caribbean
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
In theory the BDM should work with your box. But there is limit knowledge about DCT 1XXX and you need to do your work. As of the flash the USB BDM should be able to program it.
First you need to figure out the memory map of the box. Do some disassemble work and you should be able to find the memory map.
First you need to figure out the memory map of the box. Do some disassemble work and you should be able to find the memory map.
-
- Junior Member
- Posts: 673
- Joined: Thu Jul 21, 2005 4:02 pm
most CC's have done away with these boxes due to their limited ram (1meg i believe). there wasn't enough room to add ondemand, fancier guides etc. i used to have access to tons of them but they are all gone now. one thing to look out for on these boxes is that most of them are old enough now that the batteries are going dead in them. so once they are unplugged from power they lose there memory and you get an E11 box.
Who is online
Users browsing this forum: No registered users and 3 guests