e11 Dct2224 as development board

BDM (NT) on Star Choice
Post Reply
duffy
Junior Member
Posts: 101
Joined: Fri Mar 31, 2006 12:15 pm

e11 Dct2224 as development board

Post by duffy »

By using a Dct2224 with the xc chip removed (or disabled?), just an idea, if someone could use the Dct2224 as a dev board to send spi command to any models (whatever if a bdm or jtag is available via the serial port of the Dct2224 just for testing purpose ? This will make testing avalaible for some new model (hd,...) and just to not spend more time to work on each firmware and for each model (the works already been done in the past why not use it?).

Probably this setup could be used to log too ? I like the filter option....

The microprocessor on the model to test should have the reset pin enable to put the device in a high impedance while sending command.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

I did initial experiment to send SPI command to another box. Another box act as XC chip server and issue back the SPI command to the "client". Is this what you wan to do?
duffy
Junior Member
Posts: 101
Joined: Fri Mar 31, 2006 12:15 pm

Post by duffy »

No, it's first for learning and testing XC with any model (new HD and other that does'nt have modded firmware) by just logging and/or sending command to the spi bus. I know there are already existing plug-n play usb hardware on the market that are doing that (bus pirate). I was thinking to use old junk e11 as a cheap, well known and available to many member here to do this task.

About your experiment:
It is about CW sharing ? If it is, I really don't think that the cw would appear on the spi bus plaintext (nor encrypted) . I think you have nothing to share if the xc decrypt according to the key prog. inside. Encrypted stream come to the xc and decrypted stream at the output. Sharing decrypted stream is probably already done with an acquisition board to feed xbmc client, and people can filter not used pid in real time with some thing like sfk software to save some bandwith.
IRT mode enabled on these atsc ird ? You coul switch pid es and replay stream to see if it will decrypt...Again, I could be wrong
TrustMah
Junior Member
Posts: 2
Joined: Wed Feb 05, 2014 11:22 pm
Location: US
Contact:

Preved. You are not right. Write to me in PM, we will communicate.

Post by TrustMah »

Preved-Medved

Rather amusing phrase
Killswitch
Junior Member
Posts: 439
Joined: Tue Mar 23, 2010 6:12 am

Post by Killswitch »

Amusing but accurate.
DeanOfTears
Junior Member
Posts: 37
Joined: Wed Apr 16, 2014 4:51 am
Location: Illinois

ummm

Post by DeanOfTears »

TrustMah wrote:Preved-Medved

Rather amusing phrase

Am I reading this right? post is from 4 years ago guys...
Killswitch
Junior Member
Posts: 439
Joined: Tue Mar 23, 2010 6:12 am

Post by Killswitch »

Yea, you're not stoned. I'm wondering what this noob is trying to develop. One of my Posts has already gone down. It wasn't the first - at least 50 have gotten censored. More to follow.
TrustMah
Junior Member
Posts: 2
Joined: Wed Feb 05, 2014 11:22 pm
Location: US
Contact:

Preved. I congratulate, a remarkable idea

Post by TrustMah »

Preved-Medved

In my opinion you are mistkaen. Write to me in PM, we will talk.
Wolfgang
Junior Member
Posts: 158
Joined: Fri May 03, 2013 6:00 pm
Location: Wild Wild West
Contact:

Is this about Medved Auto Dealership?

Post by Wolfgang »

TrustMah wrote:Preved-Medved

In my opinion you are mistaken. Write to me in PM, we will talk.
What the hell is this? Some kind of anagram puzzles? Can you guys speak plain English?
Killswitch
Junior Member
Posts: 439
Joined: Tue Mar 23, 2010 6:12 am

Post by Killswitch »

I'm actually setting here laughing my Jock off. This site is slowly becoming a dumping ground for non-technical peeps. I'm casually waiting for this fool to become a Rocket Scientist. This one's really creeped out !
Wolfgang
Junior Member
Posts: 158
Joined: Fri May 03, 2013 6:00 pm
Location: Wild Wild West
Contact:

Post by Wolfgang »

Killswitch wrote:I'm actually setting here laughing my Jock off. This site is slowly becoming a dumping ground for non-technical peeps. I'm casually waiting for this fool to become a Rocket Scientist. This one's really creeped out !
You got that right. If one tries early in the morning, there are spam posts available on this forum. They are adds for porn and dating sites, etc, just name it. Of course later on the master catches up and deletes them, LOL
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests