cisco epc2325
-
- Junior Member
- Posts: 27
- Joined: Sun May 13, 2007 8:16 am
cisco epc2325
hola
he conectado este modem al usbjtagnt y me detecta el chip y me dice q informe de estos valores
-detect
IDCODE 0336817F
Broadcom BCM3368
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 0bf0,02a1
la flash es una s29gl064n90tf104 de la casa spansion y el chip en realidad es un bcm3361
tengo que añadir algun archivo al software?
saludos
he conectado este modem al usbjtagnt y me detecta el chip y me dice q informe de estos valores
-detect
IDCODE 0336817F
Broadcom BCM3368
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 0bf0,02a1
la flash es una s29gl064n90tf104 de la casa spansion y el chip en realidad es un bcm3361
tengo que añadir algun archivo al software?
saludos
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
The JTAG connection should be right.chusin wrote:hola
he conectado este modem al usbjtagnt y me detecta el chip y me dice q informe de estos valores
-detect
IDCODE 0336817F
Broadcom BCM3368
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 0bf0,02a1
la flash es una s29gl064n90tf104 de la casa spansion y el chip en realidad es un bcm3361
tengo que añadir algun archivo al software?
saludos
When we detect the flash we need to make sure several parameters.
1. Endian,
2. BYTE or WORD access.
3. If WRITE is even enabled on the flash chip.
All these needs to be done via the XML file.
There is no XML file yet for this modem.
Can you try to select SBG900 and see if you get anything?
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
busca el PDF de la flash s29gl064n90tf104 Y ahi tendras la informacion para crear el XML. Puedes Mirar otr XML para que veas el format de como se deve escribir. No es tan dificil.chusin wrote:hola
como hago el archivo xml?
xml file as I do?
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 27
- Joined: Sun May 13, 2007 8:16 am
- <flash>
<id1>0x0BF0</id1>
<id2>0x02A1</id2>
<name>SPANSION s29gl064n90tf104</name>
<size>0xXXXXXXX</size>
<protocol>X</protocol>
- <block>
<secnum>X</secnum>
<secsize>0xXXXXX</secsize>
<secnum>XXXXX</secnum>
<secsize>0xXXXXX</secsize>
</block>
SERIA ALGO ASI PERO CAMBIANDO LAS X POR LOS VALORES ADECUADOS Y AÑADIENDO AL ARCHIVO FLASH.XML ?
<id1>0x0BF0</id1>
<id2>0x02A1</id2>
<name>SPANSION s29gl064n90tf104</name>
<size>0xXXXXXXX</size>
<protocol>X</protocol>
- <block>
<secnum>X</secnum>
<secsize>0xXXXXX</secsize>
<secnum>XXXXX</secnum>
<secsize>0xXXXXX</secsize>
</block>
SERIA ALGO ASI PERO CAMBIANDO LAS X POR LOS VALORES ADECUADOS Y AÑADIENDO AL ARCHIVO FLASH.XML ?
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Correcto. Los valores los podras encontrar en el PDF de la flash.chusin wrote:- <flash>
<id1>0x0BF0</id1>
<id2>0x02A1</id2>
<name>SPANSION s29gl064n90tf104</name>
<size>0xXXXXXXX</size>
<protocol>X</protocol>
- <block>
<secnum>X</secnum>
<secsize>0xXXXXX</secsize>
<secnum>XXXXX</secnum>
<secsize>0xXXXXX</secsize>
</block>
SERIA ALGO ASI PERO CAMBIANDO LAS X POR LOS VALORES ADECUADOS Y AÑADIENDO AL ARCHIVO FLASH.XML ?
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
NO! Do not do this. It will not work.chusin wrote:- <flash>
<id1>0x0BF0</id1>
<id2>0x02A1</id2>
<name>SPANSION s29gl064n90tf104</name>
<size>0xXXXXXXX</size>
<protocol>X</protocol>
- <block>
<secnum>X</secnum>
<secsize>0xXXXXX</secsize>
<secnum>XXXXX</secnum>
<secsize>0xXXXXX</secsize>
</block>
SERIA ALGO ASI PERO CAMBIANDO LAS X POR LOS VALORES ADECUADOS Y AÑADIENDO AL ARCHIVO FLASH.XML ?
It is not flash.xml but your target xml is not right.
-
- Junior Member
- Posts: 27
- Joined: Sun May 13, 2007 8:16 am
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Hay que joderse. LMFAO.............chusin wrote:hola
he visto que en el software esta la opción de añadir nueva flash supongo que tendré que poner tamaño 8 tipo amd y los id que me da al detectar el chip, lo que no se es a que hace referencia los sectores. alguien puede ayudarme? no se por donde agarrar esto
saludos
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Who is online
Users browsing this forum: No registered users and 3 guests