anyone can hook me up sbg900 back up needed

All WiFi Modems
Locked
RIP_Felipeferras
Junior Member
Posts: 489
Joined: Thu Dec 31, 2009 6:33 pm

anyone can hook me up sbg900 back up needed

Post by RIP_Felipeferras »

anyone that have a good back up for sbg900 Image
٩(●̮̮̃•)۶=ε/̵͇̿̿/'̿'̿ ̿ ᴼ•ₒ ○ ˚ͦ ◦•ᵒ ºᴼ•ₒ no andaba muerto andaba de parranda ₒ•ᴼ۝
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

Check with me Later Buddy. I have one.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
ccvictornillo
Junior Member
Posts: 65
Joined: Mon Mar 29, 2010 10:22 pm

Post by ccvictornillo »

Que chip trae tu sbg900? ya sabes cuando te conectes al msn te lo paso.
RIP_Felipeferras
Junior Member
Posts: 489
Joined: Thu Dec 31, 2009 6:33 pm

este

Post by RIP_Felipeferras »

Copyright (C) 2010,2011,2012
USB JTAG NT 0.46
Target: SBG900
-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 8060,7840
Image
-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9f400000 CFI Intel 28F640J3
٩(●̮̮̃•)۶=ε/̵͇̿̿/'̿'̿ ̿ ᴼ•ₒ ○ ˚ͦ ◦•ᵒ ºᴼ•ₒ no andaba muerto andaba de parranda ₒ•ᴼ۝
abescalamis
Junior Member
Posts: 32
Joined: Fri Feb 05, 2010 2:16 pm

Back up needed

Post by abescalamis »

I need a back up too, please.
[email protected] thank you very much
absolut
Junior Member
Posts: 20
Joined: Mon Oct 06, 2008 5:26 pm

Post by absolut »

prueba esto

Necesitan un backup de un modem virgen extraido con USBJTAG(nt). Despues hay que modificar el archivo llamado flash.xml que se encuentra en la carpeta config de la USBJTAG NT, lo modifican como sigue (la seccion de la flash que modifiquen depende de cual sea la suya, la que les arroje el detect, en mi caso es la 28F640J3):

<flash>
<id1>0x89</id1>
<id2>0x17</id2>
<name>Intel 28F640J3</name>
<size>0x800000</size>
<buffersize>0x20</buffersize>
<protocol>1</protocol>

Les debe de quedar asi:


<flash>
<id1>0x89</id1>
<id2>0x17</id2>
<name>Intel 28F640J3</name>
<size>0x800000</size>
<protocol>1</protocol>

lo guardas asi y procede


y los comandos son estos

detect
//Seleccionas el boot original
ldram boot
//Disminuimos la velocidad de la USBJTAG NT
speed 2
//Para desabilitar el CFI
cfi 0
detect
//Borramos y programamos el boot a una vel mas lenta para que lo grabe
erase boot
sprogram boot
cmpram boot //Aqui te debe de salir OK ( si no empieza de nuevo)
//Volvemos la velocidad y el cfi como estaban
speed 0
cfi 1
//Aqui apagan y encienden el modem sin desconectar la usbjtag nt del mismo.
ldram app
program 9fc20000 3c0000
cmpram app //Debe de salir OK
ldram cfg
program 9ffe0000 20000
cmpram cfg //Debe de dar OK


y vivo de nuevo el modem!!!!!!!!!!!!
ccvictornillo
Junior Member
Posts: 65
Joined: Mon Mar 29, 2010 10:22 pm

Post by ccvictornillo »

absolut wrote:
detect
//Seleccionas el boot original
ldram boot
//Disminuimos la velocidad de la USBJTAG NT
speed 2
//Para desabilitar el CFI
cfi 0
detect
//Borramos y programamos el boot a una vel mas lenta para que lo grabe
erase boot
sprogram boot
cmpram boot //Aqui te debe de salir OK ( si no empieza de nuevo)
//Volvemos la velocidad y el cfi como estaban
speed 0
cfi 1
//Aqui apagan y encienden el modem sin desconectar la usbjtag nt del mismo.
ldram app
program 9fc20000 3c0000
cmpram app //Debe de salir OK
ldram cfg
program 9ffe0000 20000
cmpram cfg //Debe de dar OK


y vivo de nuevo el modem!!!!!!!!!!!!
Probado al 100%, este procedimiento funciona MUY BIEN!
abescalamis
Junior Member
Posts: 32
Joined: Fri Feb 05, 2010 2:16 pm

Post by abescalamis »

I was only able to debrick my modem with this method.
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

abescalamis wrote:I was only able to debrick my modem with this method.
And What else did You Expect? For Modem to go ONLINE???????????????
If So, Your in the Wrong Place. This site is about Programming Not About Getting Modem ONLINE.......
This Site does not Create Hack Firmware NOR Provides Support For HACK Firmware.
Go To Proper Site For Firmware Support.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
RIP_Felipeferras
Junior Member
Posts: 489
Joined: Thu Dec 31, 2009 6:33 pm

Post by RIP_Felipeferras »

im still waiting for this back up anyone


Image
٩(●̮̮̃•)۶=ε/̵͇̿̿/'̿'̿ ̿ ᴼ•ₒ ○ ˚ͦ ◦•ᵒ ºᴼ•ₒ no andaba muerto andaba de parranda ₒ•ᴼ۝
sb5101e
Junior Member
Posts: 112
Joined: Thu Aug 11, 2011 7:44 pm
Contact:

Post by sb5101e »

I need a back up too, please.
[email protected]
thank you very much !!
Locked

Who is online

Users browsing this forum: No registered users and 9 guests