Sb4200 detects in Usbjtag but not in Ujmodem
-
- Junior Member
- Posts: 116
- Joined: Sat Dec 20, 2008 2:21 pm
Sb4200 detects in Usbjtag but not in Ujmodem
Whenever i try to detect my sb4200 in ujmodem i het this message.
-detect
IDCODE 00000000
ADM ADM5120
IMPCODE 00000000
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
However when i detect in Usbjtag i get. detect
IDCODE 0334517F
Broadcom BCM3345
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 TC58FVT160
Here is where the real problem is. I was able to flash modem twice with ujmodem about a month ago and flashed it 3 times with usbjtag when ujmodem stopped detecting the modem, but now when i program with usbjtag this is the rusult i get
-detect
IDCODE 0334517F
Broadcom BCM3345
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 TC58FVT160
-ldram 9fc00000
-ldram 9fc00000
-erase 9fc00000 00200000
Erase starts...
Erase time 00:00:00 (.312)
-sprogram 9fc00000 200000
Program Starts...
Program speed 16.51 KB/s
Program time 00:02:07 (.375)
Program pass, if no further programming needed, power off/on the target
Script finished
-cmpram 9fc00000 200000
Time 00:00:08 (.781)
Compare data Failed address 9FC00000,target FF,PC memory 10
On the modem i have 4 lights that are on. Power recieve send and standby. They never come off, also i have tried flashing different 2mb dumps to the modem and still get the same result. I have tried manually erasing the flash and then sprogram 9fc00000 200000 but still Compare data Failed address 9FC00000,target FF,PC memory
-detect
IDCODE 00000000
ADM ADM5120
IMPCODE 00000000
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
However when i detect in Usbjtag i get. detect
IDCODE 0334517F
Broadcom BCM3345
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 TC58FVT160
Here is where the real problem is. I was able to flash modem twice with ujmodem about a month ago and flashed it 3 times with usbjtag when ujmodem stopped detecting the modem, but now when i program with usbjtag this is the rusult i get
-detect
IDCODE 0334517F
Broadcom BCM3345
IMPCODE 00800908
EJTAG V1, V2.0
DMA supoorted
Found Address= 9fc00000 TC58FVT160
-ldram 9fc00000
-ldram 9fc00000
-erase 9fc00000 00200000
Erase starts...
Erase time 00:00:00 (.312)
-sprogram 9fc00000 200000
Program Starts...
Program speed 16.51 KB/s
Program time 00:02:07 (.375)
Program pass, if no further programming needed, power off/on the target
Script finished
-cmpram 9fc00000 200000
Time 00:00:08 (.781)
Compare data Failed address 9FC00000,target FF,PC memory 10
On the modem i have 4 lights that are on. Power recieve send and standby. They never come off, also i have tried flashing different 2mb dumps to the modem and still get the same result. I have tried manually erasing the flash and then sprogram 9fc00000 200000 but still Compare data Failed address 9FC00000,target FF,PC memory
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
If you have the blackcat jtag you could try the blackcat soft or Jtag Utility
They work way better at debricking these Modems than the USBJTag NT. Sorry USBBDM but thats the truth. I find that the USBJTAG NT More often then Not screws these Old Modems. Never had a problem with the SB5100's and Up but with these old Modems Yes , So I stick to using etherboot to load firmware to them with out problems and blackcat to debrick them if I get a Bricked one to fix.
Never Killed a 3100.4100,4101 or 4200 with etherboot.
They work way better at debricking these Modems than the USBJTag NT. Sorry USBBDM but thats the truth. I find that the USBJTAG NT More often then Not screws these Old Modems. Never had a problem with the SB5100's and Up but with these old Modems Yes , So I stick to using etherboot to load firmware to them with out problems and blackcat to debrick them if I get a Bricked one to fix.
Never Killed a 3100.4100,4101 or 4200 with etherboot.
-
- Junior Member
- Posts: 116
- Joined: Sat Dec 20, 2008 2:21 pm
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
The modem if F&*Ked then.
You can try writeing a Backup of a Working Sb4200 And see if it gets passed that. Has worked on ocation for me. For the most part It doesn't.
It's not geting frquency. theres a full dump with hack that makes them get past this point and it does work<,,,, Down side is No matter what you do config wise you get a max of 3 Mb downloads if your that lucky. LOL
You can try writeing a Backup of a Working Sb4200 And see if it gets passed that. Has worked on ocation for me. For the most part It doesn't.
It's not geting frquency. theres a full dump with hack that makes them get past this point and it does work<,,,, Down side is No matter what you do config wise you get a max of 3 Mb downloads if your that lucky. LOL
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Speed 1 should also work and a little bit faster than speed 2.cablehackernoob wrote:Speed 2 programmed perfectly, thanks.
Edit: one other problem, now the Sb4200 is stuck on receive. it just sites there for hours with receive light flashing. any insight?
I can only answer you how to program. For the question of SB4200 get stuck, someone else might be help.
-
- Junior Member
- Posts: 116
- Joined: Sat Dec 20, 2008 2:21 pm
could you tell me the name of the full dump that does that? or point me to a link.TUNDRA wrote:The modem if F&*Ked then.
You can try writeing a Backup of a Working Sb4200 And see if it gets passed that. Has worked on ocation for me. For the most part It doesn't.
It's not geting frquency. theres a full dump with hack that makes them get past this point and it does work<,,,, Down side is No matter what you do config wise you get a max of 3 Mb downloads if your that lucky. LOL
-
- Junior Member
- Posts: 116
- Joined: Sat Dec 20, 2008 2:21 pm
Thanks man.TUNDRA wrote:I will search for the full file to send to you.
I am willing to help you look for it it i know what i am looking for.... I dont like being a lazy bum ..lol
Usbbdm: I tried Programming at full speed and it now detects and programs fine...still not gettin frequency tho but thundra is helping me out with that. Thanks again.
P.s i cannot access the site form my isp, i have to use a proxy.
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
What is your IP address (send me PM). This site is under ddos still and there is a filter to certain IP range.cablehackernoob wrote:Thanks man.
I am willing to help you look for it it i know what i am looking for.... I dont like being a lazy bum ..lol
Usbbdm: I tried Programming at full speed and it now detects and programs fine...still not gettin frequency tho but thundra is helping me out with that. Thanks again.
P.s i cannot access the site form my isp, i have to use a proxy.
-
- Junior Member
- Posts: 116
- Joined: Sat Dec 20, 2008 2:21 pm
Who is online
Users browsing this forum: No registered users and 5 guests