EJTAG pinout for sb5100
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
EJTAG pinout for sb5100
Pin1 ? TRST
Pin3 ? TDI
Pin5 - TDO
Pin7 ? TMS
Pin9 ? TCK
Pin3 ? TDI
Pin5 - TDO
Pin7 ? TMS
Pin9 ? TCK
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
I received many emails asking the same question and I am making this post sticky.
The USB JTAG is 14 pin EJTAG standard. SB5100 uses the first 10 pin of EJTAG connector and you only see 10 pin of them. Since a lot user already familiar with Blackcat and they believe JTAG should be 10 pin. For different CPU there is different standard.
In EJTAG, 14 pin is standard, it is used in DCT 700 DCT2500 and SB5120 DVI HD6412. To use SB5100 and some other modems, you only need to connect the First 10 pins. Leave the rest 4 pins unconnected.
Here is a picture connect 14 pin JTAG to 10 pin SB5100.
Here is a picture connect 14 pin JTAG to 14 pin SB5120.
The USB JTAG is 14 pin EJTAG standard. SB5100 uses the first 10 pin of EJTAG connector and you only see 10 pin of them. Since a lot user already familiar with Blackcat and they believe JTAG should be 10 pin. For different CPU there is different standard.
In EJTAG, 14 pin is standard, it is used in DCT 700 DCT2500 and SB5120 DVI HD6412. To use SB5100 and some other modems, you only need to connect the First 10 pins. Leave the rest 4 pins unconnected.
Here is a picture connect 14 pin JTAG to 10 pin SB5100.
Here is a picture connect 14 pin JTAG to 14 pin SB5120.
-
- Junior Member
- Posts: 177
- Joined: Thu Jul 26, 2007 7:52 am
want some colors
Get out the magic markers
-
- Junior Member
- Posts: 21
- Joined: Wed Jul 27, 2005 9:16 pm
- Location: NewYork&Chicago
- Contact:
-
- Junior Member
- Posts: 20
- Joined: Fri Oct 27, 2006 5:23 pm
- Location: Forest Hill, MD
pinout pictures
could you fix the pictures not displaying on this thread showing the pinout on the SB5100.
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Which picture? This one should show you how to connect.dodgetech wrote:could you fix the pictures not displaying on this thread showing the pinout on the SB5100.
http://www.usbjtag.com/jtagdevices/sb5100jtag.jpg
-
- Junior Member
- Posts: 117
- Joined: Thu Aug 14, 2008 2:07 pm
Motorola SB5100usbbdm wrote:Pin1 ? TRST
Pin3 ? TDI
Pin5 - TDO
Pin7 ? TMS
Pin9 ? TCK
CPU : BCM3348A1
RAM : 8Mb
Flash : 2Mb
DOCSIS and EuroDOCSIS compatible
Serial pinout
There is an unpopulated U12 connector, here is the pinout :
--- --- VCC
--- ---
--- --- GND
--- ---
--- ---
--- --- TX
--- ---
RX--- ---
JTAG pinout
The 10-pin JTAG pinout is as follow :
Ethernet connector
TCK TMS TDO TDI TRST
GND GND GND GND GND
USB connector
Serial bootlog
Detected CPU .............. BCM3348A1
Ebi Initialized .....................000002020000001C
Sdram Initialized....................
Icache Size: ....................2000
Icache Linesize:.................0010
Dcache Size: ....................2000
Dcache Linesize:.................0010
Sdram access OK......................
Compressed Bootloader detected.......
ImageCSize: ...................0062D3
ImageLoc: ...................81F80000
Decompression Status: .......00000000
Dcompressed Image Size:......00011005
BSS Initialized......................
TMP Stack initialized................
Perm Stack initialized...............
MemSize: ......................... 8M
Flash detected @0xbe000000
Signature: 3348
Who is online
Users browsing this forum: No registered users and 4 guests