P12 recovery using u-Link NT
-
- Junior Member
- Posts: 2
- Joined: Wed Mar 23, 2022 5:39 pm
P12 recovery using u-Link NT
Greetings. I am trying to recover a bricked P12 PCM, P12 PCM Service # 12597521. I see that the P12 is almost identical to the E40 as both PCMs use the same main and slave CPUs as well as the same flash chip, however the E40 uses CAN and the P12 uses VPW. Also the circuit boards have some different circuit traces so I do not think using the E40s BDM wiring points will work. Is there anyone that has tried this who could provide me some information please? Thank you in advance.
-
- Junior Member
- Posts: 8979
- Joined: Mon Jul 18, 2005 9:33 pm
Re: P12 recovery using u-Link NT
The person sent me e40 to work with has p12 and he confirmed that BDM does work. The pins are compatible at the bottom rows and you need trace back to the pcb to find spot for easy soldering.
-
- Junior Member
- Posts: 2
- Joined: Wed Mar 23, 2022 5:39 pm
Re: P12 recovery using u-Link NT
Okay, I will give it a try. Thank you.
Who is online
Users browsing this forum: No registered users and 1 guest