Hello
I try to read flash AB28F400B5B by BDM but no success , this is a TCM module of Allison Md3060, is this possible to read the flash by USBJTAG NT inside mcu MC68HC16Y1 ?
Photo of ecu
https://e1.pcloud.link/publink/show?code=kZ0igHZ379n8XArGTht9moKJVwvuJxIazaV
Regards
TCM Allison Md3060 on MC68HC16Y1 flash AB28F400B5B
-
- Junior Member
- Posts: 1
- Joined: Sun Nov 25, 2018 2:01 pm
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Re: TCM Allison Md3060 on MC68HC16Y1 flash AB28F400B5B
The photo is not very clear. But I think there are TWO CPUs, One is MC683xx CPU and the other is MC68HC16Y1.
The tool to read the MC6833X CPU is USB BDM NT or u-link NT. The tool to read MC68HC16Y1 should be u-link NT but I have not tested it myself. Should be of minor work. USB JTAG NT will have no use here.
From the image you have selected ECU40 and I think you should have connection issue for your BDM NT. Check the connection carefully and then we need to get proper xml to work with this setup properly.
The tool to read the MC6833X CPU is USB BDM NT or u-link NT. The tool to read MC68HC16Y1 should be u-link NT but I have not tested it myself. Should be of minor work. USB JTAG NT will have no use here.
From the image you have selected ECU40 and I think you should have connection issue for your BDM NT. Check the connection carefully and then we need to get proper xml to work with this setup properly.
Who is online
Users browsing this forum: No registered users and 1 guest