Infineon Tricore Bootmode

This talks about BDM used on card Engine computer
Decryptor
Junior Member
Posts: 26
Joined: Thu Nov 29, 2007 10:08 pm

Post by Decryptor »

Thanks for getting in touch today.
Some more random information. I will keep posting anything I find hoping that it can help you, and I will be picking out the perfect ecu for you.

http://www.mdsacademy.co.kr/new/bbs/rea ... =&keyword=
ddillenger
Junior Member
Posts: 9
Joined: Tue Mar 18, 2014 12:40 pm

Post by ddillenger »

This is very exciting, as I too would love to be able to tricore boot without having to resort to clone tools. I have the tricore plugin for my MPPS, but options are good!
Decryptor
Junior Member
Posts: 26
Joined: Thu Nov 29, 2007 10:08 pm

Post by Decryptor »

http://www.embeddedrelated.com/usenet/e ... 6772-1.php

http://www.infineon.com/cms/en/product/ ... 6b50fe07c9

http://www.infineon.com/cms/en/product/ ... edc494011e

from infineon memtool
"Infineon Memtool 4 Overview
The Infineon On-Chip Memory Programming Tool 4 (Memtool 4) is intended to handle the on-chip FLASH and OTP memory devices on Microcontrollers of the XC800, XC16x and TriCore families. According to the capabilities of the respective on-chip memory device the program allows to erase, program, verify and protect the module. To program a memory device one can open an Intel-Hex-File and completely or partly write its contents into the memory device. Infineon Memtool 4 can be used on PC's running Microsoft Windows2000, WindowsXP Pro, Windows Vista or Windows 7. The target is connected to the host PC using DAS Wigler or a standard RS232 port.
?
Decryptor
Junior Member
Posts: 26
Joined: Thu Nov 29, 2007 10:08 pm

Post by Decryptor »

usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: Infineon Tricore Bootmode

Post by usbbdm »

I now have a Tricore ECU in hand. I think using serial port to program the ECU is possible with the existing document.
I am also interested in programming it via JTAG. However the OCDS document for TC17XX cannot be found anywhere. I have requested to get the document from Infineon but get nothing back other than being asked a few questions.
If anyone have the OCDS information, please contact me.
keyinminutes
Junior Member
Posts: 4
Joined: Fri Nov 19, 2021 1:02 pm

Re: Infineon Tricore Bootmode

Post by keyinminutes »

Did anyone ever try this or was anymore development done? I have a BMW ME9.2 by Bosch I am trying to read and so far I have had no success with Ktag, MPPS, etc. Was just wondering if anyone had any luck with usb Jtag?


Thanks
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Re: Infineon Tricore Bootmode

Post by usbbdm »

I thought no one is interested and stopped the development. I am now working on another CPU for ECU and can come back of development after that.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests