dct700 plat issue
-
- Junior Member
- Posts: 10
- Joined: Tue Dec 28, 2010 3:43 pm
dct700 plat issue
I'm debricking a dct700 everythings ok until ldram plat won't start
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
LOL Would you Mind giveing A more Clear Explanation of your Problem?mikeljordan23 wrote:I'm debricking a dct700 everythings ok until ldram plat won't start
when you ldram plat won't start? WTH does that mean? ldram plat is in software, if you don't do Program plat, then you have not programed to box therefore it should not affect Box. So please Explane Exactly What you are doing so we can try to Help You solve your Problem. All I can say for sure at this point is, Its USER ERROR Related for SURE.
-
- Junior Member
- Posts: 10
- Joined: Tue Dec 28, 2010 3:43 pm
DCT700 plat issue
Sorrry, can't program plat. I backed up info on a subd-unit to lock it out. I couldn't get it to power back up after reset so tried to debrick I was able to ldram boot, sprogram boot, scmpram boot no problem but couldn't get unit to load plat....
-
- Junior Member
- Posts: 10
- Joined: Tue Dec 28, 2010 3:43 pm
DCT700 plat issue
Sorry I mean program plat it stays at start. I hope your right and it is user error...
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
-
- Junior Member
- Posts: 10
- Joined: Tue Dec 28, 2010 3:43 pm
-
- Junior Member
- Posts: 10
- Joined: Tue Dec 28, 2010 3:43 pm
-
- Junior Member
- Posts: 1417
- Joined: Wed Jan 28, 2009 4:01 pm
-
- Junior Member
- Posts: 71
- Joined: Wed Mar 03, 2010 9:12 pm
detect
ldram boot
erase boot
sprogram boot
disconnect and connect the box (until you see the orange LED lights and connect the USB port usbjtag your pc)
detect
ldram plat
program plat
disconnect and connect the box
Now program the nvram or whatever we want to upload to the deco sig.forma:
Setdct
Loading nvram and 90000000.bin
with that the box is already active but need to change the uid and other things to block all for it ...
detect
getram nvram (Here you go to the DCT and then Testing Network Address and Network Address put where it says the following and then you give 0000000000001000 OK)
Setram nvram
getram plat (Here you go to the DCT and then Firmware Testing Test your selecionas DCT700 and everything is there and where it
ldram boot
erase boot
sprogram boot
disconnect and connect the box (until you see the orange LED lights and connect the USB port usbjtag your pc)
detect
ldram plat
program plat
disconnect and connect the box
Now program the nvram or whatever we want to upload to the deco sig.forma:
Setdct
Loading nvram and 90000000.bin
with that the box is already active but need to change the uid and other things to block all for it ...
detect
getram nvram (Here you go to the DCT and then Testing Network Address and Network Address put where it says the following and then you give 0000000000001000 OK)
Setram nvram
getram plat (Here you go to the DCT and then Firmware Testing Test your selecionas DCT700 and everything is there and where it
-
- Junior Member
- Posts: 9
- Joined: Wed Aug 31, 2011 5:09 pm
is there more instructions to finish debrick dct700?
is there more instructions to finish debrick dct700?
pancho wrote:detect
ldram boot
erase boot
sprogram boot
disconnect and connect the box (until you see the orange LED lights and connect the USB port usbjtag your pc)
detect
ldram plat
program plat
disconnect and connect the box
Now program the nvram or whatever we want to upload to the deco sig.forma:
Setdct
Loading nvram and 90000000.bin
with that the box is already active but need to change the uid and other things to block all for it ...
detect
getram nvram (Here you go to the DCT and then Testing Network Address and Network Address put where it says the following and then you give 0000000000001000 OK)
Setram nvram
getram plat (Here you go to the DCT and then Firmware Testing Test your selecionas DCT700 and everything is there and where it
Who is online
Users browsing this forum: No registered users and 2 guests