WRT54GS v1.1
-
- Junior Member
- Posts: 5
- Joined: Thu Jan 10, 2008 1:07 pm
WRT54GS v1.1
Hello. I have a WRT54GS v1.1 that is bricked. USBJtag identifies this as:
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3
When writing CFE I must erase and then use sprogram for it to appear to write. However when finished it doesn't appear to do anything. CMPRAM is useful to let me know for sure this is true.
-sprogram cfe
Program Starts...
Program time 00:01:02 .081
-cmpram cfe
Compair data Failed address 9FC00000,target 00,PC memory 17
I was told by a friend that this has been acknowledged as not actually able to write data. Is there any kind of fix for this?
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3
When writing CFE I must erase and then use sprogram for it to appear to write. However when finished it doesn't appear to do anything. CMPRAM is useful to let me know for sure this is true.
-sprogram cfe
Program Starts...
Program time 00:01:02 .081
-cmpram cfe
Compair data Failed address 9FC00000,target 00,PC memory 17
I was told by a friend that this has been acknowledged as not actually able to write data. Is there any kind of fix for this?
-
- Junior Member
- Posts: 5
- Joined: Thu Jan 10, 2008 1:07 pm
I am using .19. I have downloaded version .21 but I don't see how that version will help the situation. The problem is the usbjtag.def for the WRT54GS. This WRT54GS has a 8MB flash for the Intel 28F640J3 controlled by a BCM4712 so it is a bit different than the definition written in by default. Any assistance editing this would be much appreciated. Thanks.
-
- Junior Member
- Posts: 8
- Joined: Thu Jan 15, 2009 6:47 am
I know this is old thread but since I got the same bricked wrt54gs v 1.1 with 8mb flash i figured i'll try here first...
tryed wrt54gs def along with wrtdebrick and wrt54g8mb but never got it to detect flash...
Copyright (C) 2010-2025
USB JTAG NT 0.86
Target: WRT54GS
-speed 0
-detect
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 00800904
EJTAG V1, V2.0
DMA supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000
the power light is blinking and lan light lights up when cable is pluged in is the state of this brick....
tryed wrt54gs def along with wrtdebrick and wrt54g8mb but never got it to detect flash...
Copyright (C) 2010-2025
USB JTAG NT 0.86
Target: WRT54GS
-speed 0
-detect
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 00800904
EJTAG V1, V2.0
DMA supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000
the power light is blinking and lan light lights up when cable is pluged in is the state of this brick....
devDelay wrote:I am using .19. I have downloaded version .21 but I don't see how that version will help the situation. The problem is the usbjtag.def for the WRT54GS. This WRT54GS has a 8MB flash for the Intel 28F640J3 controlled by a BCM4712 so it is a bit different than the definition written in by default. Any assistance editing this would be much appreciated. Thanks.
-
- Junior Member
- Posts: 12
- Joined: Thu Jan 09, 2020 11:53 am
Re: WRT54GS v1.1
I have a G V1.1 I get an unknown flash type Also..
Broadcom BCM4702
IMPCODE 26DB6D32
EJTAG V2.6
DMA not supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum d3ed,c9ad
Broadcom BCM4702
IMPCODE 26DB6D32
EJTAG V2.6
DMA not supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum d3ed,c9ad
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Re: WRT54GS v1.1
You can go online and I can try to help you remotely (chrome remote desktop).Contract_Pilot wrote: ↑Mon Feb 24, 2020 9:02 pm I have a G V1.1 I get an unknown flash type Also..
Broadcom BCM4702
IMPCODE 26DB6D32
EJTAG V2.6
DMA not supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum d3ed,c9ad
-
- Junior Member
- Posts: 12
- Joined: Thu Jan 09, 2020 11:53 am
Re: WRT54GS v1.1
unable give remote access to that PC.
The flash is a AM29LV320DB-90EI
The flash is a AM29LV320DB-90EI
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Re: WRT54GS v1.1
Normally it should show DMA supported. So I need to issue come tap command to see if the data is right.
-
- Junior Member
- Posts: 12
- Joined: Thu Jan 09, 2020 11:53 am
Re: WRT54GS v1.1
How do i issue a come tap command?
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Re: WRT54GS v1.1
It will be tap 1 or tap 2 etc.
But the result needs to be interpreted.
But the result needs to be interpreted.
-
- Junior Member
- Posts: 12
- Joined: Thu Jan 09, 2020 11:53 am
Re: WRT54GS v1.1
-tap 1
Eco :B26DDB26
-tap 2
Eco :B26DDB26
Eco :B26DDB26
-tap 2
Eco :B26DDB26
-
- Junior Member
- Posts: 8974
- Joined: Mon Jul 18, 2005 9:33 pm
Re: WRT54GS v1.1
That is not correct.
Who is online
Users browsing this forum: No registered users and 4 guests