flash 0bf0,02a1 cisco 2325

[chusin]

hello

with target sbg900 give me 0bf0,02a1
with target 5100 give me 0bf0,02a1
with target router mn700 give me 02a1,0bf0
with target cpei25150 give me ffff,ffff

greetings

[Koevoet]

Right so now with the same connection , if you connect your old usbjtag can you paste the output here , also post the target that is being used on that 1.

Regards

[chusin]

hello

with usbjtag old and sbg900 select:


-detect
IDCODE 336817F
Broadcom Part NotFound 3368
IMPCODE 800904
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 00c2,22cb

with usbjtagnt and sbg900 select

IDCODE 0336817F
Broadcom Part NotFound 3368
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0bf0,02a1

greetings

[usbbdm]

hello

with usbjtag old and sbg900 select:


-detect
IDCODE 336817F
Broadcom Part NotFound 3368
IMPCODE 800904
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 00c2,22cb

with usbjtagnt and sbg900 select

IDCODE 0336817F
Broadcom Part NotFound 3368
IMPCODE 00800904
EJTAG V1, V2.0
DMA supoorted
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0bf0,02a1

greetings

Can you try newer version of NT? It can be easily fixed in the xml or software.
We cannot adjust good timing so I can use logmein to take a look. I believe this can be JTAGed.

[chusin]

hello
i test with usbjtagnt 0.42b and 0.42c

what is your country? then i see time

greetings

[usbbdm]

hello
i test with usbjtagnt 0.42b and 0.42c

what is your country? then i see time

greetings

As I told you we are on pacific time .