Problem with my sb5100

[xbuoix]

Ok, when I detect it reads


-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 800908
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 0020,0020

I know I am suppose to edit the flash.def, but when look at my flash chip there is a white sticker on it that reads..
501209-001-00
5EC6-V2.3.1.3-
483112-001-69

When I remove the white sticker I can see a hint M28***0CB. and the rest I can only see the last 4 digits of each line. The white sticker has ruined the print on the chip, and I can't figure out anything.

[usbbdm]

Ok, when I detect it reads


-detect
IDCODE 0334817F
Broadcom BCM3348
IMPCODE 800908
DMA supoorted
Unknown flash type!
Report these two value to [email protected] 0020,0020

I know I am suppose to edit the flash.def, but when look at my flash chip there is a white sticker on it that reads..
501209-001-00
5EC6-V2.3.1.3-
483112-001-69

When I remove the white sticker I can see a hint M28***0CB. and the rest I can only see the last 4 digits of each line. The white sticker has ruined the print on the chip, and I can't figure out anything.

I would like to see the result of
peek 9fc00000

Is this modem bricked? If not the CFI should allow you to get the detail of the flash without need the proper ID in flash.xml.
Wait this is for old USB JTAG or clone USB JTAG? (Confirmed it is a clone and sorry you are out of luck from here).

[xbuoix]

Okay, now I plug in the regular Usbjtag and it gives me this.

IDCODE 0334817F
Broadcom BCM3348
IMPCODE 800908
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0020,0020

I think maybe my modem may be bricked.. But I can't debrick it. I've tried every method possible but still detects unknown flash.

[usbbdm]

Check your PM. You get clone JTAG.

[xbuoix]

My PM? what do you mean? The first one I plug was clone, but seconds not..

[usbbdm]

My PM? what do you mean? The first one I plug was clone, but seconds not..

PM is your personal message. I explain detail there. You get a clone JTAG so no support from here.

[xbuoix]

Like I said.. the second one I plugged in was the jtag from your site. The second time I replyed was with the old usbjtag from your site. What am I to do now?

[CAPONE]

Like I said.. the second one I plugged in was the jtag from your site. The second time I replyed was with the old usbjtag from your site. What am I to do now?

Old JTAG does Not work with NEW JTAG Software.
You can ether download the soft for Old JTag to use OLD tool os Get a New USBJTAG NT to work with the New Software.

If you just need to fix an SB5100 You can Use the OLD LPT Blackcat with JtagUtility. If you cant fix with that then Nothing will do the Job. LOL

[usbbdm]

Like I said.. the second one I plugged in was the jtag from your site. The second time I replyed was with the old usbjtag from your site. What am I to do now?

I looked at your post on SBH and clearly you get the clone JTAG. You have not use my JTAG since it will generate different screen output (see EJTAG version there?).
Also do not be confused with http://www.usbjtags.com That is NOT http://www.usbjtag.com. The JTAG sell on http://www.usbjtags.com is also clone.

[bomcuoi01]

Okay, now I plug in the regular Usbjtag and it gives me this.

IDCODE 0334817F
Broadcom BCM3348
IMPCODE 800908
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0020,0020

I think maybe my modem may be bricked.. But I can't debrick it. I've tried every method possible but still detects unknown flash.

Yea, your modem is brick. What you need to do is follow the debrick method. you probably will have to use the 3.3v method.

[moddog]

Yea, your modem is brick. What you need to do is follow the debrick method. you probably will have to use the 3.3v method.

Yow bro this thread is 5 month old where were you ho i know comcrap got you