St20_tp2

JTAG on Dish Receivers.
Post Reply
kif
Junior Member
Posts: 6
Joined: Mon Feb 18, 2019 1:22 am
Location: italia

St20_tp2

Post by kif »

How to add this flash Fugitsu 293LV800TA-10PFTN

-regs 1
-detect
IDCODE 25193041
STi ST20-TP2
========================================
DeviceId = 0x25193041
OptionId = 0x25193041
PrivateId = 0x25193041
ExtraId = 0x25193041
========================================
HUDI Internal Status
----------------------------------------
SR = 0x05FFFFFE
FPSCR = 0x07FFFFFE
CCR = 0x7E
FRQCR = 0x0FFE
EXPEVT = 0x0FFF
INTEVT = 0x02FC
EBUS = 0x13FFFFFE
IBUS = 0x03FFFFFE
SBUS = 0x11FFFFFE
EBTYPE = 0x7F
SBTYPE = 0x0E
CMF = 0x3E
SCMF = 0x0F
MMUCRAT = 0x01
PTEH = 0xFE
STATUS = 0x03
kif
Junior Member
Posts: 6
Joined: Mon Feb 18, 2019 1:22 am
Location: italia

Post by kif »

st20_tp3 (Flash AM29DL163DT) -->

-speed 0
-detect
IDCODE 25194041
STi ST20-TP3
Unknown flash type!
kif
Junior Member
Posts: 6
Joined: Mon Feb 18, 2019 1:22 am
Location: italia

Post by kif »

this two recievers jtag works via jtag jkeys is OK
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

You have selected ST40 target. Should select ST20 target.
I am working on Sti5517 might be able to fix your issue also.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Do you have the datasheet of the cpu?
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Can you try to use extreamview to see if you get TRAP ON. If not try IRD2700.
kif
Junior Member
Posts: 6
Joined: Mon Feb 18, 2019 1:22 am
Location: italia

Post by kif »

St20tp2bx50s
You do not have the required permissions to view the files attached to this post.
kif
Junior Member
Posts: 6
Joined: Mon Feb 18, 2019 1:22 am
Location: italia

Post by kif »

usbbdm wrote:You have selected ST40 target. Should select ST20 target.
I am working on Sti5517 might be able to fix your issue also.
usbbdm wrote:Can you try to use extreamview to see if you get TRAP ON. If not try IRD2700.
I tried ST20 not work,Unknown flash type! trap off but jtag not locked i can read/write flash via jkeys
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

kif wrote:I tried ST20 not work,Unknown flash type! trap off but jtag not locked i can read/write flash via jkeys
I am sure I can add this support if I have the board in hand.
I will soon release Sti5517 support.
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 3 guests