Sti7111 jtag pineout ?
-
- Junior Member
- Posts: 5
- Joined: Sat Mar 17, 2012 12:58 pm
Sti7111 jtag pinout ?
hello,
please if any one can help me to find jtag pinout for this receiver
it's technosat t-786 processor sti7111
i have measured the voltage in the connector 10 pin
1- gnd
2- 0 volt
3- 0 volt
4- 3.3 volt
5- 0 v
6- 0 v
7- 0 v
8- 0.2v
9- 3.3 volt
10- 0 v
thanks in advance
please if any one can help me to find jtag pinout for this receiver
it's technosat t-786 processor sti7111
i have measured the voltage in the connector 10 pin
1- gnd
2- 0 volt
3- 0 volt
4- 3.3 volt
5- 0 v
6- 0 v
7- 0 v
8- 0.2v
9- 3.3 volt
10- 0 v
thanks in advance
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 1
- Joined: Tue Jun 26, 2012 2:48 am
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
You may have better Luck searching for INFO is you Use the Proper Words.aladin01 wrote:hello,
thanks for your help
I checked the links you gave me none are compatible with mine
I need the pineout sti7111 to track the connections on the motherboard
@+
Like Pinout NOT PINEOUT. And also research the Box Model rather than the ST7111.....
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
Yes, We all Do, I was just making a suggestion that will help you search for the info your looking for. I would suspect your not The first Person Looking into this, so theirs a good chance of you finding out INFO on this Using the Proper word spelling of Course.aladin01 wrote:sorry for my bad english ,the important thing that you understood what I'm looking
@+
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 5011
- Joined: Sat Dec 27, 2008 3:25 pm
In My Posts I have never suggested that people don't post becouse their native language is not English. So What in GODS world are you Talking about??????????usbbdm wrote:Most ST40 testers are no native English speaker. It should not block them posting in here. I have seen many people asking for remote help and use google translator while chat with me. Google translator just cannot translate well from Spanish to English or the other way around.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
-
- Junior Member
- Posts: 5
- Joined: Sun Jan 20, 2013 7:27 am
Daggi_Duck wrote:An other 10-pin JTAG connector for ST40 chips have the Opticum 9500 HD (STi7100) and the same at the Fulan-SPARK/Edision argus Pingulux (STi7111):
I took USBJTAGNT on EDISION Pingulux, everythings seems to be ok, but the following message is shown:
Code: Select all
IDCODE 2D43B041
STi Part NotFound 2D43B
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
Until I have a true target with good JTAG connection, I should be able to add support to this CPU. Which version of software do you use? Try latest one and see if it gets further.Owen Hart wrote:I took USBJTAGNT on EDISION Pingulux, everythings seems to be ok, but the following message is shown:
will this chip 7111 be supportet in future?Code: Select all
IDCODE 2D43B041 STi Part NotFound 2D43B
Who is online
Users browsing this forum: No registered users and 8 guests