usbjtag satellite nt Qbox one

JTAG on Dish Receivers.
Post Reply
joyman
Junior Member
Posts: 6
Joined: Wed Nov 28, 2007 6:20 am

usbjtag satellite nt Qbox one

Post by joyman »

good afternoon, I connected to my receiver usbjtag nt satellite Qbox one from the jtag port that has this, this receptor is similar to the DM 500 but with more things, wifi, DVB-T receiver, HDD connector, etc ..., I connected in the same way as the DM 500 and I did not recognize the flash, this is the flash you have (samsung 4.43 k9f1216uoa ycbo ) and this is what's in the program.

Copyright (C) 2010,2011,2012
USB JTAG NT 0.54
Objective: DM500
-detect
IDCODE 12955049
IBM STB02500
unknown flash type
Report these values ​​http://www.usbjtag.com/vbforum 73ff, f7ff


thanks.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

Did you power on the box AFTER the NT software starts?
joyman
Junior Member
Posts: 6
Joined: Wed Nov 28, 2007 6:20 am

Post by joyman »

I have given you and follow me out the same, the problem is that if I remember correctly this is 64 mb flash


detect
IDCODE 12955049
IBM STB02500
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 73ff,f7ff
-detect
IDCODE 12955049
IBM STB02500
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 73ff,f7ff
-detect
IDCODE 12955049
IBM STB02500
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 73ff,f7ff
-detect
IDCODE 12955049
IBM STB02500
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 73ff,f7ff
-detect
IDCODE 12955049
IBM STB02500
tipo flash desconocido
Informe de estos valores http://www.usbjtag.com/vbforum 73ff,f7ff
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

I have tested DM500 and that is all I have tested. your box could be different or bricked. I am working on Sonicview 8000 now and I might investigate your issue latter. The issue could be the memory map. If your flash is of different size then you might need different XML.
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

What is your hardware ID?
joyman
Junior Member
Posts: 6
Joined: Wed Nov 28, 2007 6:20 am

Post by joyman »

my hardware id is 4309
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

This should not be of any problem. I am out of town and cannot do any remote support. I can latter take a look remotely if you want.
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

joyman wrote:I have given you and follow me out the same, the problem is that if I remember correctly this is 64 mb flash
Then All you need to do is Add the Flash Info in the Flash XML.

Entonces lo Unico que tienes Que Hacer es Agregar la Informacion del flash dentro del Flash XML.
Macho20041
Junior Member
Posts: 10
Joined: Mon Oct 20, 2008 7:07 am

Post by Macho20041 »

algien sabe como anadir esta informacion dentro del archivo flash.xml ?


por que tngo una DM500S la cual el NT no me detecta el flash pero si el procesador

cualquier ayuda bienbenida


Gracias
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests