311.015

[CAPONE]

Have not heard anything else on this unit, did anyone ever
figure how to read and get box keys.

The JKeys posted never worked.

I read the TSOP By removing it and reading with externatl tool then re instaling. For cloning the TSOP Dump must be modified the a New TSOP program and installed.

The IRD,Box Keys and SK Sector is locked on the Original TSOP and cant be Modified only Read.

[slugworth]

The sti5517 toolset had the 58lw064 chip as one of the defaults,so I assume the stburner.lku it made would erase/program the entire chip.
I have a directv d10 receiver,but I can't figure out the jtag "spots" since it
doesn't have a jtag connector either.
It uses the smaller intel 28f320 which also has the bootsector protection.
With sti5518 based receivers there were jkeys development panel methods
to unlock that chip.

[0n3.m4n.4rmy]

The JKeys posted never worked.

I read the TSOP By removing it and reading with externatl tool then re instaling. For cloning the TSOP Dump must be modified the a New TSOP program and installed.

The IRD,Box Keys and SK Sector is locked on the Original TSOP and cant be Modified only Read.

Sorry to hear it didn't help . So if you remove the old TSOP with a smd tool you can remove the chip set and use a different reader to dump the box keys and SK keys ? Do you know if when the ird gets activated do the SK keys change different from a virgin state ?

[slugworth]

The sti5517 is a dcu3 device,so jkeys will only be able to dump the flash.
There isn't any public program to erase/write.

[CAPONE]

Sorry to hear it didn't help . So if you remove the old TSOP with a smd tool you can remove the chip set and use a different reader to dump the box keys and SK keys ? Do you know if when the ird gets activated do the SK keys change different from a virgin state ?

The card is activated not the IRD so No the SK's won't change.

[RAFTERMAN]

Can someone help me with shell access on a 311. I'v only found a babums jtag how to. It only shows how to save the firmware.