anyone from Melrose park
-
- Junior Member
- Posts: 489
- Joined: Thu Dec 31, 2009 6:33 pm
anyone from Melrose park
i'm looking for latest nvram and code for a dct2224 cr4
from melrose park
gracias
from melrose park
gracias
٩(●̮̮̃•)۶=ε/̵͇̿̿/'̿'̿ ̿ ᴼ•ₒ ○ ˚ͦ ◦•ᵒ ºᴼ•ₒ no andaba muerto andaba de parranda ₒ•ᴼ
-
- Junior Member
- Posts: 53
- Joined: Thu Mar 18, 2010 5:47 pm
-
- Junior Member
- Posts: 321
- Joined: Sun Nov 11, 2007 7:07 am
- Location: Chicago
Sorry, I have done a lot of searching but unable to find any news about EOL for STB's, only modems. (Comcrap)household2 wrote:you can take that info right out of the box by the way its not going to help because the box will be dead in 2 months in case you haven't notice comcrap kills boxes fast
Would you be so kind as to direct me?
I have one DCT2224 box left.
By the way software 5.88 says disabled and it is running 8.55, so the SPI is not working. (I have the Auth recorded)
Don't want to bother anyone for a new DLL if the box is on the EOL list.
Felipeferras - Sorry no got's
Sorry for my poor English, it is my primary language.
-
- Junior Member
- Posts: 158
- Joined: Fri May 03, 2013 6:00 pm
- Location: Wild Wild West
- Contact:
DCT2000 have 3 versions (besides the 9 phases) and out of the 3 two are obsolete. The one still active is an "agile" type which means it can search different OOB channels for data downstream. If the label ID starts with 16xx it is a good one while ID starting with 11xx or 13xx are single OOB channel boxes and are EOLs. I believe your rev is one of the EOLs based on the ROM.stomperz wrote:Sorry, I have done a lot of searching but unable to find any news about EOL for STB's, only modems. (Comcrap)
Would you be so kind as to direct me?
Your disabled 5.88 rev is the ROM, and it is normal to be disabled but when you reset the box it will get enabled. Once the box is updated online it gets the latest Plat code (in your case 8.55) and the ROM gets disabled automatically.
-
- Junior Member
- Posts: 489
- Joined: Thu Dec 31, 2009 6:33 pm
the box was ok but then i did a back up but is not good it shows some weird looking code and now i dont have the files cause i was messing with some other codes and Nv's i hadhousehold2 wrote:you can take that info right out of the box by the way its not going to help because the box will be dead in 2 months in case you haven't notice comcrap kills boxes fast
the only thing i need is the nvram tho
٩(●̮̮̃•)۶=ε/̵͇̿̿/'̿'̿ ̿ ᴼ•ₒ ○ ˚ͦ ◦•ᵒ ºᴼ•ₒ no andaba muerto andaba de parranda ₒ•ᴼ
-
- Junior Member
- Posts: 321
- Joined: Sun Nov 11, 2007 7:07 am
- Location: Chicago
SPI not working.usbbdm wrote:I checked the code. 8.55 was supported in 2012. (0.35)
I have an old recorded Auth from this box that worked before.
Don't know if this Auth will still work, pulled this dusty box off the shelf.
Also unable to change the ID from remote.
Sorry for my poor English, it is my primary language.
-
- Junior Member
- Posts: 321
- Joined: Sun Nov 11, 2007 7:07 am
- Location: Chicago
Request answer to above
scans OOB channel OBB=GOODstomperz wrote: SPI not working.
I have an old recorded Auth from this box that worked before.
Don't know if this Auth will still work, pulled this dusty box off the shelf.
Also unable to change the ID from remote.
Sorry for my poor English, it is my primary language.
Who is online
Users browsing this forum: No registered users and 2 guests