SPC56HK Bosch radar Volkswagen

JTAG software bug report.
Post Reply
LamkaxD
Junior Member
Posts: 1
Joined: Sun Jul 02, 2023 12:22 pm

SPC56HK Bosch radar Volkswagen

Post by LamkaxD »

Hi can you add support for this MCU ?
SPC56HK found in Bosch ACC (567907561)
usbbdm
Junior Member
Posts: 8994
Joined: Mon Jul 18, 2005 9:33 pm

Re: SPC56HK Bosch radar Volkswagen

Post by usbbdm »

Have you tried 1.50 and select mpc5675k?
kmodel991
Junior Member
Posts: 1
Joined: Fri Feb 23, 2024 4:43 am

Re: SPC56HK Bosch radar Volkswagen

Post by kmodel991 »

Any success with this MCU? I also tried to read similar Bosch radar and it gets into that it may be locked.


Copyright (C) 2010-2025
u-Link NT 1.51
Target: SPC560D4
-speed 0
-speed 1
-detect
IDCODE 1AEC1041
Compatible SPC560
onCE JTAG ID 0x00000000
Unknown state possile locked

Copyright (C) 2010-2025
u-Link NT 1.51
Target: MPC5602P
-speed 0
-speed 0
-detect
IDCODE 1AEC1041
Compatible SPC560
onCE JTAG ID 0x00000000
Unknown state possile locked

Copyright (C) 2010-2025
u-Link NT 1.51
Target: MPC5675K
-speed 0
-speed 0
-detect
IDCODE 1AEC1041
Compatible MPC5675K
onCE JTAG ID 0x00000000
Unknown state possile locked
usbbdm
Junior Member
Posts: 8994
Joined: Mon Jul 18, 2005 9:33 pm

Re: SPC56HK Bosch radar Volkswagen

Post by usbbdm »

Each mcu needs it's own xml. This board has not been tested yet.
ratmen
Junior Member
Posts: 1
Joined: Mon Mar 11, 2024 4:48 am
Location: Armenia

Re: SPC56HK Bosch radar Volkswagen

Post by ratmen »

SPC56HK reading done via select mcu mpc5675k , tested on w205 radar
usbbdm
Junior Member
Posts: 8994
Joined: Mon Jul 18, 2005 9:33 pm

Re: SPC56HK Bosch radar Volkswagen

Post by usbbdm »

ratmen wrote: Sat May 11, 2024 5:45 am SPC56HK reading done via select mcu mpc5675k , tested on w205 radar
Maybe I need to add can bus for those modules.
usbbdm
Junior Member
Posts: 8994
Joined: Mon Jul 18, 2005 9:33 pm

Re: SPC56HK Bosch radar Volkswagen

Post by usbbdm »

Giving what I have done to the can bus. I will attempt to unlock it via can bus. But need to finish all the ecus first.
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests