I will soon release 0.70. The main changes are
1. Restore the support for RTL8196C SPI programming. This is to support TP-LINK R402M router requested by someone who donated the router.
2. Add SFDP (CFI) like SPI flash detection. Newer flash (2010 and latter) support this so if the flash is not defined it can still be detected and used. This is only for SPI protocol. The SPI programming via JTAG will be supported in the future (like router with SPI flash).
3. Large SPI flash support. (> 32M).
The SPI change in here is mainly for the emerge device in modem via SPI protocol. SPI programming via JTAG will gradually be implemented since it will take much longer to do so.
I have also added one debug function for SPI flash in case flash with non-standard commands needs to test and this will save a lot of time waiting device or flash to arrive to my hand to test. I can remotely issue commands and possible solve the issue remotely.