ulink nand backfeeding

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:) :o :D ;) :p :mad: :confused: :( :shock: :? 8) :lol: :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :rolleyes:

BBCode is OFF
Smilies are ON

Topic review
   

Expand view Topic review: ulink nand backfeeding

Re: ulink nand backfeeding

by phantomstranger » Tue Jun 01, 2021 2:09 pm

I'm in the US and have a few MR33s with uboot 2017 and would like to see if I could send them to you to flash for me. I would have pm you but I don't have access to do that yet. I can't find a NAND flasher for a good price to justify it at this time. If you could post a link to a 360 clip and programmer I could use that would be appreciated.

Re: ulink nand backfeeding

by usbbdm » Thu Nov 12, 2020 9:05 pm

I can confirm programming MR33 is very easy with u-Link NAND. It only draws 90ma for 3.3v to operate. It makes the connection very easy. Simply use the 3.3v from the u-Link NAND.

Re: ulink nand backfeeding

by usbbdm » Mon Nov 09, 2020 11:54 am

I will get MR33 soon and will make a video.
Sure it can do openwrt but I will see if I need some dump file from someone or I can make it myself.

Re: ulink nand backfeeding

by newtman » Sun Nov 08, 2020 6:38 am

Ok, how about using it on MR33? Will it install openwrt? How would be the process?

Re: ulink nand backfeeding

by usbbdm » Fri Nov 06, 2020 5:35 pm

There are two ways to apply power to the flash.
One is using 3.3v from the u-Link NAND. The other is to use the 3.3v from target board.
If you configured the power from 3.3v on target it will not back feeding to the u-Link NAND.
So far it is still new and I am working with people to get more experience.
As long as you DO NOT try to make contact (clip) while either side has power it is quite safe. However if you find connection is not stable and try to "fix" it while the power is on, the risk is very high. This applies to SPI flash as well.

ulink nand backfeeding

by newtman » Fri Nov 06, 2020 5:31 pm

Hello, I am interested in the ulink nand but I would like to know if it prevents backfeeding in order to have a proper dump and avoid short-circuits when using the clip.

Thanks

Top