USB JTAG  

Go Back   USB JTAG > USBJTAG (NT) > Product Support.

Reply
 
Thread Tools Display Modes
  #1  
Old 11-14-2016, 11:52 PM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default ubee DDW36C

how can i add support for Ubee winbond 25q128fvfg
https://www.pjrc.com/teensy/W25Q128FV.pdf
thank you
Reply With Quote
  #2  
Old 11-14-2016, 11:54 PM
ricktendo ricktendo is offline
Senior Member
 
Join Date: Nov 2014
Posts: 103
Default

You may need to add a new spi flash profile to spiflash.xml
Reply With Quote
  #3  
Old 11-15-2016, 01:16 AM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default after desoldering the spi

i was able to read it with scrip6120
but after verifying i get a fail
Reply With Quote
  #4  
Old 11-15-2016, 10:08 AM
usbbdm usbbdm is offline
Administrator
 
Join Date: Jul 2005
Posts: 8,885
Default

Quote:
Originally Posted by hr23-700 View Post
i was able to read it with scrip6120
but after verifying i get a fail
This means the connection is not right yet. (ISP is not working for you).
Reply With Quote
  #5  
Old 11-15-2016, 04:33 PM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default

can u check please
Attached Files
File Type: rar ubee-ddw36c.rar (239.8 KB, 66 views)
Reply With Quote
  #6  
Old 11-15-2016, 07:14 PM
usbbdm usbbdm is offline
Administrator
 
Join Date: Jul 2005
Posts: 8,885
Default

Quote:
Originally Posted by hr23-700 View Post
can u check please
How long is your wire to the target? You should keep them as short as possible or use slower clock (6M or 3M).
You have the most setup right.
Reply With Quote
  #7  
Old 11-18-2016, 11:12 AM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default

sorry for the late response !!!!!!
yes im using 3 foot of usb cable
and from jtag im using the cables u send me
thank you
Reply With Quote
  #8  
Old 11-22-2016, 06:40 PM
CAPONE CAPONE is offline
Senior Member
 
Join Date: Dec 2008
Posts: 5,093
Default

hr23-700, That BackUp is No good.
__________________
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
Reply With Quote
  #9  
Old 11-23-2016, 07:19 PM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default

thank you guys , so what am i doing wrong
1st i cant read the chip installed in the board
2nd when i could read it its off the board and its reads the wrong stuff
what do i need to read the correct info ?
why i cant read it off the board?
ive been following the lines from chip and the board and it turns out that when i follow pin 1 from spi which its hold there's a surface mount resistor or something like that connects pin 9 which its w with pin1
no idea.....
also im reading it with the sb6120 script,,,
its there's a XML or script for this modems
any help will b appreciate
Reply With Quote
  #10  
Old 05-10-2017, 10:59 PM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default

hey guys i have this modems that i could read but i dont have the right xml
how can i get the proper xml to read and write
the first dump belongs to a UBEE Cypress_S25FL128S_00-FFFFFF_2.rarDDW365
Reply With Quote
  #11  
Old 05-10-2017, 11:01 PM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default

and this one belongs to DDW36cWinbond_W25Q128_00-FFFFFF.rar
please any buddy that's know how to create a XML
thank you
Reply With Quote
  #12  
Old 05-11-2017, 02:40 AM
CAPONE CAPONE is offline
Senior Member
 
Join Date: Dec 2008
Posts: 5,093
Default

Quote:
Originally Posted by hr23-700 View Post
and this one belongs to DDW36cAttachment 1126
please any buddy that's know how to create a XML
thank you
SB6120 is 8Mb Flash and these are both 16Mb Flash. You should try instead to read as a DCP3000 which is also a 16Mb Flash. Or you can go in config settings, under Category, chose "Develop", Under Protocol "SPIFLASH" and Under Target, "25128", that will also read the full 16Mb and from that if the compare is Good, a proper XML can be created for that Target.

If you need help, I may be able thru Teamviewer to help you and can show you how to create XML also.
__________________
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."

Last edited by CAPONE; 05-11-2017 at 02:42 AM.
Reply With Quote
  #13  
Old 05-13-2017, 12:54 PM
hr23-700 hr23-700 is offline
Member
 
Join Date: Jan 2011
Posts: 58
Default

they are the samecompare.rar
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 09:02 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.