USB JTAG  

Go Back   USB JTAG > USBJTAG (NT) > JTAG to debrick

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-22-2008, 06:33 PM
devDelay devDelay is offline
Junior Member
 
Join Date: Jan 2008
Posts: 5
Default WRT54GS v1.1

Hello. I have a WRT54GS v1.1 that is bricked. USBJtag identifies this as:

IDCODE 1471217F
Broadcom BCM4712
IMPCODE 800904
DMA supoorted
Found Address= 9fc00000 Intel 28F640J3

When writing CFE I must erase and then use sprogram for it to appear to write. However when finished it doesn't appear to do anything. CMPRAM is useful to let me know for sure this is true.

-sprogram cfe
Program Starts...
Program time 00:01:02 .081
-cmpram cfe
Compair data Failed address 9FC00000,target 00,PC memory 17

I was told by a friend that this has been acknowledged as not actually able to write data. Is there any kind of fix for this?
Reply With Quote
  #2  
Old 02-22-2008, 09:08 PM
usbbdm usbbdm is offline
Administrator
 
Join Date: Jul 2005
Posts: 8,510
Default

Which version of software you are using? There are certain version of software that will cause some problem. If you use 0.21 you should have less trouble.
Reply With Quote
  #3  
Old 02-23-2008, 10:16 AM
devDelay devDelay is offline
Junior Member
 
Join Date: Jan 2008
Posts: 5
Default

I am using .19. I have downloaded version .21 but I don't see how that version will help the situation. The problem is the usbjtag.def for the WRT54GS. This WRT54GS has a 8MB flash for the Intel 28F640J3 controlled by a BCM4712 so it is a bit different than the definition written in by default. Any assistance editing this would be much appreciated. Thanks.
Reply With Quote
  #4  
Old 10-06-2019, 08:33 PM
deniskacool deniskacool is offline
Junior Member
 
Join Date: Jan 2009
Posts: 2
Default

I know this is old thread but since I got the same bricked wrt54gs v 1.1 with 8mb flash i figured i'll try here first...
tryed wrt54gs def along with wrtdebrick and wrt54g8mb but never got it to detect flash...
Copyright (C) 2010-2025
USB JTAG NT 0.86
Target: WRT54GS
-speed 0
-detect
IDCODE 1471217F
Broadcom BCM4712
IMPCODE 00800904
EJTAG V1, V2.0
DMA supported
Unknown flash type!
Report these values http://www.usbjtag.com/vbforum 0000,0000

the power light is blinking and lan light lights up when cable is pluged in is the state of this brick....

Quote:
Originally Posted by devDelay View Post
I am using .19. I have downloaded version .21 but I don't see how that version will help the situation. The problem is the usbjtag.def for the WRT54GS. This WRT54GS has a 8MB flash for the Intel 28F640J3 controlled by a BCM4712 so it is a bit different than the definition written in by default. Any assistance editing this would be much appreciated. Thanks.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 07:34 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.