need help with 5100

SB5XXX,SBV5XXX
Locked
bichhoo
Junior Member
Posts: 24
Joined: Wed Apr 22, 2009 11:55 am

need help with 5100

Post by bichhoo »

my problem is this modem was working fine week ago.

now problem is it light ,2,3rd light is solid green. but 4th light is keep flashing ( 5th light is fine with plunging Ethernet wire.) send & receiving is fine,problem is going on line light. it should be solid. but it just flashing.i debrick & reprogram also but same thing.please let me know what to do.
thanks in advance.
mr.sky
Junior Member
Posts: 289
Joined: Fri Nov 10, 2006 3:30 pm

Post by mr.sky »

bichhoo wrote:my problem is this modem was working fine week ago.

now problem is it light ,2,3rd light is solid green. but 4th light is keep flashing ( 5th light is fine with plunging Ethernet wire.) send & receiving is fine,problem is going on line light. it should be solid. but it just flashing.i debrick & reprogram also but same thing.please let me know what to do.
thanks in advance.
are you on comcast, same thing happened to me, using sigma-x2, i hear sb5100mod should work, i have it, but dont know how to set it up,
if someone knows please send me pm.
bichhoo
Junior Member
Posts: 24
Joined: Wed Apr 22, 2009 11:55 am

Post by bichhoo »

yes. it was working before.
mr.sky
Junior Member
Posts: 289
Joined: Fri Nov 10, 2006 3:30 pm

Post by mr.sky »

I tried different configs, with no results, even tried walledgarden.cm. i tried this
with sb5100mod. i even here some people with haxoware are having the same
issues. and haxoware works with 5101, not 5100.
RicZOti
Junior Member
Posts: 2
Joined: Sun Dec 09, 2007 9:12 am

Fw upgrades

Post by RicZOti »

Comcast is forcing FW upgrades in some areas therefore if your modem does not report the right FW; it won’t even get pass the “SENDâ€￾ light. You have to Spoof your FW to get passed Comcast security. Sigma X2 is not a good candidate to bypass Comcast securities. Stick with 5100mod 1.04b for the SB5100 & Haxorware 1.1 rev32 for the SB5101.
bichhoo
Junior Member
Posts: 24
Joined: Wed Apr 22, 2009 11:55 am

Post by bichhoo »

i have 3 same kind modem with same flash same programing. works fine.if one has problem all may have it? but not.
mr.sky
Junior Member
Posts: 289
Joined: Fri Nov 10, 2006 3:30 pm

Post by mr.sky »


stomperz
Junior Member
Posts: 321
Joined: Sun Nov 11, 2007 7:07 am
Location: Chicago

SB5100 Mod

Post by stomperz »

Try this

On the SB5100MoD:

On the Clone TAB:

Software: SB6120-1.0.1.7-SCM00-NOSH.NNDMN

sysDescr: SB6120-1.0.1.7-SCM00-NOSH

docsDevDwCurrentVers:

NOTE: You must change each string and click save below it one at a time.

On the CM Config TAB:

Options:

Load Config from Flash: (CHECK)


Configuration file from Flash Memory:

Current file
File Name:
d11_m_sb6120_widebandblast_c01.cm
mr.sky
Junior Member
Posts: 289
Joined: Fri Nov 10, 2006 3:30 pm

update

Post by mr.sky »

stomperz wrote:Try this

On the SB5100MoD:

On the Clone TAB:

Software: SB6120-1.0.1.7-SCM00-NOSH.NNDMN

sysDescr: SB6120-1.0.1.7-SCM00-NOSH

docsDevDwCurrentVers:

NOTE: You must change each string and click save below it one at a time.

On the CM Config TAB:

Options:

Load Config from Flash: (CHECK)


Configuration file from Flash Memory:

Current file
File Name:
d11_m_sb6120_widebandblast_c01.cm
Follow yours steps one by one, ON the last step where it says
Configuration file from Flash Memory
Current File
this is what i get.
File Name: n/a
File Size n/a
There is no place to type a configuration file.

Config Changer is checked at Load Config from Flash Memory:
Anyone else having this problem. thnks. i typed the above config name in notebook, and saved it. I then I used config uploader to send it to configuration file from Flash Memory, the problem is i get this in File Name. d11_m_sb6120_widebandblast_c01.cm.txt
I think the txt at end of config file is screwing me up. how do i get rid of it?
moddog
Junior Member
Posts: 638
Joined: Fri Aug 20, 2010 1:47 pm
Location: Some ware just like you.
Contact:

Post by moddog »

can some one help me with my sb5100 i just flash it with sigma when i connect the modem on typ 192.168.100.1 i get the sigma page i change the mac and click change and all light come on but when i unplug it an plug it back in i get 2 light any help will do thanks?
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »


"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
CAPONE
Junior Member
Posts: 5011
Joined: Sat Dec 27, 2008 3:25 pm

Post by CAPONE »

bichhoo wrote:my problem is this modem was working fine week ago.

now problem is it light ,2,3rd light is solid green. but 4th light is keep flashing ( 5th light is fine with plunging Ethernet wire.) send & receiving is fine,problem is going on line light. it should be solid. but it just flashing.i debrick & reprogram also but same thing.please let me know what to do.
thanks in advance.
Should go to CH and READ you will Find the Answer there.
"If you give a man a fish you feed him for a day. If you teach a man to fish you feed him for a lifetime."
moddog
Junior Member
Posts: 638
Joined: Fri Aug 20, 2010 1:47 pm
Location: Some ware just like you.
Contact:

Post by moddog »

is there a video show how to debrick sb5100 just want to no?
usbbdm
Junior Member
Posts: 8962
Joined: Mon Jul 18, 2005 9:33 pm

Post by usbbdm »

moddog wrote:is there a video show how to debrick sb5100 just want to no?
For SB5100 if you can detect flash it is easy to debrick. Just use erase and sprogram. If you cannot detect flash, read this http://www.usbjtag.com/jtagnt/debricksb5100.php
moddog
Junior Member
Posts: 638
Joined: Fri Aug 20, 2010 1:47 pm
Location: Some ware just like you.
Contact:

Post by moddog »

usbbdm wrote:For SB5100 if you can detect flash it is easy to debrick. Just use erase and sprogram. If you cannot detect flash, read this http://www.usbjtag.com/jtagnt/debricksb5100.php
I can detect detect flash thanks master!
Locked

Who is online

Users browsing this forum: No registered users and 3 guests