WRT54g V8
-
- Junior Member
- Posts: 177
- Joined: Thu Feb 26, 2009 9:50 am
- Location: S FL
- Contact:
-
- Junior Member
- Posts: 15
- Joined: Mon Sep 10, 2007 6:09 pm
usbbdm,
my WRT54gV8 is bricked so bad after trying to load dd-wt fm, all 5 lights from right to left are up.
i'm using usbjtag 0.30v and i'm only getting:
detect
IDCODE 2535417F
Broadcom Part NotFound 5354
IMPCODE 810904
DMA supoorted
In your prev post you said "USB JTAG NT is the solution. The old USB JTAG has issue when detect and since clone exist, no more fixes for the clone"
But, is any way to debrick this sh**t with 0.30 Licensed version?
maybe a good def file will help?
my WRT54gV8 is bricked so bad after trying to load dd-wt fm, all 5 lights from right to left are up.
i'm using usbjtag 0.30v and i'm only getting:
detect
IDCODE 2535417F
Broadcom Part NotFound 5354
IMPCODE 810904
DMA supoorted
In your prev post you said "USB JTAG NT is the solution. The old USB JTAG has issue when detect and since clone exist, no more fixes for the clone"
But, is any way to debrick this sh**t with 0.30 Licensed version?
maybe a good def file will help?
-
- Junior Member
- Posts: 8962
- Joined: Mon Jul 18, 2005 9:33 pm
There is some luck you can do. 3.3V is one solution for old USB JTAG. It is possible but very hard.
The detect lockup is the problem so you need to do a lot of unplug/power off/on to get out of the state.
Def file will not do any help in debricking the router.
The method used in NT is to stop the CPU at bootup and you have full control. The clone is all it does to stop the development of old USB JTAG. The time spent on debrick V8 with old USB JTAG will be much longer than NT. All I am saying is possible but harder and longer.
USB JTAG NT software was based on USB JTAG.
0.01 of NT equals to 0.31 of USB JTAG.You can see how much the NT has been enhanced.
The detect lockup is the problem so you need to do a lot of unplug/power off/on to get out of the state.
Def file will not do any help in debricking the router.
The method used in NT is to stop the CPU at bootup and you have full control. The clone is all it does to stop the development of old USB JTAG. The time spent on debrick V8 with old USB JTAG will be much longer than NT. All I am saying is possible but harder and longer.
USB JTAG NT software was based on USB JTAG.
0.01 of NT equals to 0.31 of USB JTAG.You can see how much the NT has been enhanced.
-
- Junior Member
- Posts: 15
- Joined: Mon Sep 10, 2007 6:09 pm
usbbdm, payment is sent, please check your '[email protected]' email
-
- Junior Member
- Posts: 177
- Joined: Thu Feb 26, 2009 9:50 am
- Location: S FL
- Contact:
-
- Junior Member
- Posts: 15
- Joined: Mon Sep 10, 2007 6:09 pm
JTAG NT - Unknown flash type!
usbbdm, i need your help
(DEBUG OFF)
Copyright http://www.usbjtag.com 2008,2009,2010
USB JTAG NT 0.27a
-tap c
Eco :00000000
-tap a ffffffff
Eco :00C12000
(Still DEBUG OFF) powered off/on (Still DEBUG OFF)
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
-tap c
Eco :00000000
-tap a ffffffff
Eco :04C92000
(DEBUG ON)
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
(DEBUG OFF)
Copyright http://www.usbjtag.com 2008,2009,2010
USB JTAG NT 0.27a
-tap c
Eco :00000000
-tap a ffffffff
Eco :00C12000
(Still DEBUG OFF) powered off/on (Still DEBUG OFF)
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
-tap c
Eco :00000000
-tap a ffffffff
Eco :04C92000
(DEBUG ON)
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
-
- Junior Member
- Posts: 15
- Joined: Mon Sep 10, 2007 6:09 pm
-
- Junior Member
- Posts: 15
- Joined: Mon Sep 10, 2007 6:09 pm
strange problem
first time detect, second no
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Found Address= 9fc00000 K8D1716UB
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
first time detect, second no
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Found Address= 9fc00000 K8D1716UB
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum 0000,0000
-
- Junior Member
- Posts: 15
- Joined: Mon Sep 10, 2007 6:09 pm
When DEBUG is OFF i can detectusbbdm wrote:You need to put the DEBUG ON state and then erase the cfe. Then sprogram the cfe.
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Found Address= 9fc00000 K8D1716UB
-tap c
Eco :00000000
-tap a ffffffff
Eco :04C12000
When DEBUG is ON - Unknown flash type!
-detect
IDCODE 2535417F
Broadcom BCM5345
IMPCODE 00810904
EJTAG V2.6
DMA supoorted
Unknown flash type!
Report these two value to http://www.usbjtag.com/vbforum ffff,ffff
Who is online
Users browsing this forum: No registered users and 5 guests