solder jtag correctly but still modem does not work.

USB BDM software. Bug report.
keyence
Posts: 2
Joined: Sat Aug 24, 2019 3:23 pm

solder jtag correctly but still modem does not work.

Post by keyence » Sat May 16, 2020 11:47 am

i programed a sb6140 modem correctly but is not working? i solder the jtag is it possible that the solder did not solder correctly and still forceware loads correctly into the modem and see it but not work when plugging the coaxial cable. (bad solder into the jtag) but why i see forceware in the modem?

usbbdm
Posts: 8593
Joined: Mon Jul 18, 2005 9:33 pm

Re: solder jtag correctly but still modem does not work.

Post by usbbdm » Sat May 16, 2020 3:45 pm

How do you determine you have soldered properly?

keyence
Posts: 2
Joined: Sat Aug 24, 2019 3:23 pm

Re: solder jtag correctly but still modem does not work.

Post by keyence » Sat May 16, 2020 5:32 pm

i dont know maybe loose wires but i check them and they are ok so i have no idea what it is because the boxes dont work at all. but when i type 198.168.100.1 i see forceware there. so i have no idea whats going on..

Post Reply