Changing Setting from Command Windows . . .
-
- Junior Member
- Posts: 79
- Joined: Tue Jun 17, 2008 11:19 pm
Changing Setting from Command Windows . . .
It's pocible to change the config device from the command windows in usbjtag(nt) program?
The windows where you type
detect
ldram
setram
etc.. etc.
Supoce I was testing with a SB4200 and now i want to change to SBG900, change setting with a command ... not with a mouse..
I'm trying to use a scrip with diferent opcion .. something like a MainMenu.usp runing diferente scrip.
THankz in advanced.
Keep Trying . . . !
The windows where you type
detect
ldram
setram
etc.. etc.
Supoce I was testing with a SB4200 and now i want to change to SBG900, change setting with a command ... not with a mouse..
I'm trying to use a scrip with diferent opcion .. something like a MainMenu.usp runing diferente scrip.
THankz in advanced.
Keep Trying . . . !
-
- Junior Member
- Posts: 72
- Joined: Tue Jan 25, 2011 7:52 pm
- Location: Jax FL
-
- Junior Member
- Posts: 79
- Joined: Tue Jun 17, 2008 11:19 pm
up !! !
Thats is very nice... i like tha option.usbbdm wrote:While I am adding SonicviewHD support I have add this feature and very convenient to use.
You can switch target easy.
config dct700
config sb5100
config sb6120
very fast switching. Faster than go to the recent target selection.
Look in thebuzzybuzzard wrote: please it just fine the way it is
Category... are 8 option . . .
in the
Protocol ... are 11 option . . .
and inthe Target..... a lot more.
If there is a way to make the swap seleccion from one device to another... thankzs !!
Like the boss said... is more easy just enter "config dp301-010" and change...
To got to Do this.... Open Config..... look for witch Category... them try witch Protocol.... and last look for the right Target...
I'm trying to use the scrip lenguaje build in the USBJTAG(nt)and change like thats make more esay and eficience to use...
Again... Thankz USBBDM for all your support!
Keep Trying . . . !
-
- Junior Member
- Posts: 489
- Joined: Thu Dec 31, 2009 6:33 pm
-
- Junior Member
- Posts: 72
- Joined: Tue Jan 25, 2011 7:52 pm
- Location: Jax FL
Since i copy and paste dont type unless i have to and dont use the Tabs at all as i use addresing i dont see it is worth the trouble like the speed i use the mouse the detect i use F1 and the other programed function keys
People will type config 5100 when it was config SB5100 so u will have to call an error check thing check fo upper or lower case just blow up the program
or worse config Sb5100 when it should be SB5101 and not look at the screen
the hardest part of program idiot proofing
People will type config 5100 when it was config SB5100 so u will have to call an error check thing check fo upper or lower case just blow up the program
or worse config Sb5100 when it should be SB5101 and not look at the screen
the hardest part of program idiot proofing
-
- Junior Member
- Posts: 1417
- Joined: Wed Jan 28, 2009 4:01 pm
not everyone uses mouses. in fact very few actually use them now adays with all the laptops out there, as for the spelling errors, well if people cannot spell rite then that is their problem they will have to learn if they want to use that function~ also i am pretty positive not spelling something correct will NOT blow up the program..lol. worst case is that the program will not reconize the command and will not jump over to that device....ALSO usbbdm KNOWS what he is doing with these updates that he continuelly puts out. if he thinks it is worth doing the work to do then surley IT IS ! he hears ALL the feedback and what people request to make things easier and faster! he has been doing this LONG before you came herebuzzybuzzard wrote:Since i copy and paste dont type unless i have to and dont use the Tabs at all as i use addresing i dont see it is worth the trouble like the speed i use the mouse the detect i use F1 and the other programed function keys
People will type config 5100 when it was config SB5100 so u will have to call an error check thing check fo upper or lower case just blow up the program
or worse config Sb5100 when it should be SB5101 and not look at the screen
the hardest part of program idiot proofing
live your life like a beer commericial
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
Use TAB key to auto complete and avoid spelling error.justsomeguy wrote:not everyone uses mouses. in fact very few actually use them now adays with all the laptops out there, as for the spelling errors, well if people cannot spell rite then that is their problem they will have to learn if they want to use that function~ also i am pretty positive not spelling something correct will NOT blow up the program..lol. worst case is that the program will not reconize the command and will not jump over to that device....ALSO usbbdm KNOWS what he is doing with these updates that he continuelly puts out. if he thinks it is worth doing the work to do then surley IT IS ! he hears ALL the feedback and what people request to make things easier and faster! he has been doing this LONG before you came here
In here the actual key I type will be
co(TAB) this will give you the CONFIG. I hope this small trick will help you to avoid spelling issue.
-
- Junior Member
- Posts: 1417
- Joined: Wed Jan 28, 2009 4:01 pm
you think of EVERYTHING don't ya~!~!:D good job boss man , keep up the GREAT work!usbbdm wrote:Use TAB key to auto complete and avoid spelling error.
In here the actual key I type will be
co(TAB) this will give you the CONFIG. I hope this small trick will help you to avoid spelling issue.
live your life like a beer commericial
-
- Junior Member
- Posts: 72
- Joined: Tue Jan 25, 2011 7:52 pm
- Location: Jax FL
and i use script for most of the program and since i dont use tabs and copy and paste the addresing I still dont see why any one would want that, i could buy or like to have some more program keyboard keys
Yes USBDBM u do a great job i under stand how u are calling the config from a folder but i think it is just fine like it is, if u change the config someone will screw up and bitch about it.NUFF SAID
Yes USBDBM u do a great job i under stand how u are calling the config from a folder but i think it is just fine like it is, if u change the config someone will screw up and bitch about it.NUFF SAID
-
- Junior Member
- Posts: 8981
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 1417
- Joined: Wed Jan 28, 2009 4:01 pm
like i said before NOT EVERYONE does the way you do, so just because you think it's a waste of time dont mean squat......NUFF SAIDbuzzybuzzard wrote:and i use script for most of the program and since i dont use tabs and copy and paste the addresing I still dont see why any one would want that, i could buy or like to have some more program keyboard keys
Yes USBDBM u do a great job i under stand how u are calling the config from a folder but i think it is just fine like it is, if u change the config someone will screw up and bitch about it.NUFF SAID
live your life like a beer commericial
-
- Junior Member
- Posts: 72
- Joined: Tue Jan 25, 2011 7:52 pm
- Location: Jax FL
Who is online
Users browsing this forum: No registered users and 1 guest