Sonicview HD had been received.
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
I am actively working on it and getting some result. However, time is still limited. Hope I can have more time on it during the holiday time.
The information I get is from the ST document and some forum. So far I can get HUDI response. The basic peek/poke have not working yet but I am heading the right direction.
I am also getting Sti5202 (ST40) boxes to test. This will be arrived on January.
The information I get is from the ST document and some forum. So far I can get HUDI response. The basic peek/poke have not working yet but I am heading the right direction.
I am also getting Sti5202 (ST40) boxes to test. This will be arrived on January.
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
Fixed some error.
Code: Select all
DeviceId = 0x2D424041
PrivateId = 0x02000000
OptionId = 0x03301E86
ExtraId = 0xFFFFFFFF
========================================
HUDI Internal Status
----------------------------------------
SR = 0x700000F1
FPSCR = 0x00040001
CCR = 0x00
FRQCR = 0x0E0A
EXPEVT = 0x01A0
INTEVT = 0x0440
EBUS = 0x00000000
IBUS = 0xFC0003D4
SBUS = 0x00000000
EBTYPE = 0x00
SBTYPE = 0x00
CMF = 0x00
SCMF = 0x00
MMUCRAT = 0x00
PTEH = 0x00
STATUS = 0x00
-
- Junior Member
- Posts: 1417
- Joined: Wed Jan 28, 2009 4:01 pm
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
I got other ST40 targets.
Based on STi5202. Compatible with STi7109.
This is an IP TV standard. Small box. Same St40 JTAG port was populated.
PCB
JTAG
Flash S29GL128
This is an IP TV standard. Small box. Same St40 JTAG port was populated.
PCB
JTAG
Flash S29GL128
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
Flash detection is done. If it is not for fastest speed, the slow programming should be finished in a few days.
However I am still trying to get the fastest speed possible. So it might take a little longer.
One of the options is to release a version that is not fastest and then release another version that do the faster programming.
STi 71xx has four core and to program the flash you have to select the ST40 core to JTAG. The protocol is completely different than ST20. It is similar to Hitachi SH4 core and I hope that JTAG NT can automatically support SH4 core.
You should have noticed I have not released new software for a while due to this ST40 development. Actually during this period time, there are several improvement done.
1. Now the category can be expanded through xml file. Not hard coded. If you have your own category you can create one. (I create one called IPTV).
2. A better language support, (unicode directory now supported). This is found while support a Chinese user who always get file load error and turns out he is storing files under Chinese named folder.
3. Configuration can be done through command. eg. "config sb5101" will automatically switch to sb5101 target.
I will keep on posting this thread and in a few days I should know if a slow speed will release first or wait for a faster speed release.
However I am still trying to get the fastest speed possible. So it might take a little longer.
One of the options is to release a version that is not fastest and then release another version that do the faster programming.
STi 71xx has four core and to program the flash you have to select the ST40 core to JTAG. The protocol is completely different than ST20. It is similar to Hitachi SH4 core and I hope that JTAG NT can automatically support SH4 core.
You should have noticed I have not released new software for a while due to this ST40 development. Actually during this period time, there are several improvement done.
1. Now the category can be expanded through xml file. Not hard coded. If you have your own category you can create one. (I create one called IPTV).
2. A better language support, (unicode directory now supported). This is found while support a Chinese user who always get file load error and turns out he is storing files under Chinese named folder.
3. Configuration can be done through command. eg. "config sb5101" will automatically switch to sb5101 target.
I will keep on posting this thread and in a few days I should know if a slow speed will release first or wait for a faster speed release.
-
- Junior Member
- Posts: 8966
- Joined: Mon Jul 18, 2005 9:33 pm
Who is online
Users browsing this forum: No registered users and 2 guests