ak4d7 wrote:"maybe there's a new chip on this one i have"
that was my first thought too, I know that they have released newer versions of the CoolRunner..Also I am not sure if anyone has had any success with programming the CoolRunner, at least i have not seen any posts about it.
Are you guys sure that the file generated is for the chip? If so NT should be able to support it.
Where to get the chip?
i found that tut on another thread on this forum. thats the method i used to send you the 2 .stapl files that you checked for me. i dont know of any other way to convert the .jed to .jam or .stapl
but couldnt get it to do anything on windows 7... any other way to make a .jam/.stapl from .jed or .xsvf? the timing files for the chips only include .jed and .xsvf?
i found that tut on another thread on this forum. thats the method i used to send you the 2 .stapl files that you checked for me. i dont know of any other way to convert the .jed to .jam or .stapl
but couldnt get it to do anything on windows 7... any other way to make a .jam/.stapl from .jed or .xsvf? the timing files for the chips only include .jed and .xsvf?
thanks in advance
XC2C64A should be the one I have used. Let find it somewhere in the closet and see if I can program it with 0.61.
I think there is a bug. I will investigate and hope to have a fix soon.
[Edit]
Upload 0.62 solved this issue. This was a bug in 0.61. Actually from 0.55 and up the CPLD was broken.
I will check the crash and see if it happens. I always double click the file on left. If it crashes I will fix it right away.
However, I programmed my device with your file and it works. Try several time and see if there is any difference.
ok i did try it quite a few times. can you give me some insight on your system? is it 64bit or 32bit? and which version of windows? 7? xp? or should any of this matter?
does any reason stick out to you why i would get:
"File Execution Failure."?
anythink you can think of that i should try to check? thanks again
cataclysMic1 wrote:ok i did try it quite a few times. can you give me some insight on your system? is it 64bit or 32bit? and which version of windows? 7? xp? or should any of this matter?
does any reason stick out to you why i would get:
"File Execution Failure."?
anythink you can think of that i should try to check? thanks again
cataclysMic1 wrote:heres the files i need converted. thanks alot
I do not know how to convert it. However you can try my jam file and see if it works for you. If it does not work for you then you do not have issue with the file.